Key takeaways
- 01Closest swap: Dumbbell Bench Press. Expect about 17% less total load than the barbell.
- 02Shoulder pain: Dumbbell Floor Press or a 30° incline.
- 03No equipment: push-ups, made heavy enough, built similar strength in two trials.
- 04Log the swap as its own exercise. Re-baseline the weight; keep the rep range.
On this page
The best bench press alternative is the Dumbbell Bench Press: same lying press, same chest and front delts, and it needs a bench and two dumbbells instead of a rack and a spotter. If dumbbells are the problem too, pick from the table below by situation: floor press for shoulders, push-ups for no equipment, a machine press when you train alone and want to go close to failure.
The bench press trains a horizontal push: chest, triceps and the front of the shoulder, with the shoulder blades pinned to a bench. Any swap that keeps that pattern keeps most of the training effect. What changes is how much you can lift, how stable the load is, and where in the range the shoulder works hardest.
The alternatives, by situation
Every exercise below is in the LiftLoggr exercise library under the name shown, so you can swap it in mid-workout and it keeps its own history.
| Situation | Exercise (LiftLoggr name) | Why it works |
|---|---|---|
| No barbell | Dumbbell Bench Press | Same pattern. Pec and front-delt activity matched the barbell in Saeterbakken 2011; triceps worked a little less. |
| No barbell | Incline Dumbbell Bench Press | Set the bench at about 30°. That angle gave the highest upper-pec activity of five angles tested. |
| No barbell, no bench | Dumbbell Floor Press | Lie on the floor. Short range, no need for a bench, easy to bail out of a failed rep. |
| Shoulder-friendly | Dumbbell Squeeze Press | Neutral grip, dumbbells pressed together. Elbows stay tucked and the load is lighter. |
| Shoulder-friendly | Barbell Floor Press | Keeps the barbell and your loading history close, but the floor ends the rep before the deep stretch. |
| Machine only | Machine Chest Press | Fixed path, no balance demand, safe to take close to failure alone. |
| Machine only | Smith Machine Bench Press | Nearly the same load as the barbell (about 3% less in Saeterbakken 2011). Set the safeties. |
| Machine only | Cable Chest Press | Constant tension through the whole range; good as a second press after the main lift. |
| Home, bodyweight | Push-Up (then Weighted Push-Up) | Made hard enough, push-ups built similar strength to benching in two separate trials. |
| Home, bands | Resistance Band Chest Press | Load climbs as you lock out. Fine for a hotel room; hard to progress precisely. |
| Beginner | Incline Push-Up or Kneeling Push-Up | Lower the load by raising the hands or dropping to the knees. Progress by lowering the incline. |
Dip (Chest Focus) is a strong swap for lifters whose shoulders tolerate the bottom of a dip. It is a poor pick for the same lifters who need a shoulder-friendly bench alternative, which is why it isn’t in the table.
Why these swaps carry over
Dumbbells. In Saeterbakken et al. (2011), twelve trained men tested 1RM on the Smith machine, barbell and dumbbells. Pectoralis major and anterior deltoid activity didn’t differ between the three. Dumbbells lowered triceps activity and raised biceps activity, because the arms have to stabilise two loose weights. The 1RM was 17% lower than the barbell. That number is the one to use when you re-baseline.
Push-ups. Calatayud et al. (2015) matched push-ups to bench press by muscle activity, using elastic bands to bring push-ups up to a 6RM effort. After five weeks both groups gained similar 1RM and 6RM strength. Kikuchi and Nakazato (2017) matched push-ups to 40% of bench 1RM and found similar muscle growth and strength over eight weeks. The catch is effort: plain push-ups for sets of 30 are a different stimulus. Keep them in a range where the last reps are hard.
Incline angle. Rodríguez-Ridao et al. (2020) measured five bench angles. Upper-pec activity peaked at 30°. Above 45° the front delt took over and pec activity dropped. If you swap to an incline to spare a shoulder or bring up the upper chest, 30° is the setting.
How to swap without losing progress
- Keep the rep range. If the bench sat at 3 × 6–8, the swap starts at 3 × 6–8. Changing the exercise and the rep scheme at once makes the first sessions impossible to judge.
- Re-baseline the load. Barbell to dumbbells: start each dumbbell at roughly 35–40% of your barbell working weight (80 kg × 8 on the bar suggests 28–32 kg dumbbells). Barbell to Smith: start about 5% lighter. Machines have no carry-over at all; their stacks aren’t comparable between brands. Do the first session at 2–3 reps in reserve and write it down.
- Log it as a separate exercise. A Dumbbell Bench Press PR is not a bench PR. Mixing them in one history makes estimated 1RM and charts meaningless.
- Hold it for a block. Four to eight weeks, then return or keep it. Kassiano et al. (2022) found planned variation helps; constant rotation doesn’t.
What LiftLoggr does when you swap
Open the exercise’s menu in a workout and tap Swap exercise…. The picker opens with a Suggested section first: the closest matches from the library, ranked by movement pattern, shared primary muscles and the same kind of loading, skipping anything already in today’s session. For Barbell Bench Press the first suggestions are Barbell Floor Press, Close Grip Barbell Bench Press and Paused Barbell Bench Press. Any other exercise is one search away.
The swap keeps the slot’s sets and rep target, unticks every set and refills them from the new exercise’s own history. If you have never done it, the weight field is empty: that is your re-baseline. The first session of a new exercise is recorded as a baseline, not a personal record, so the app won’t celebrate a “PR” on a lift you have never done. Your barbell bench history, PRs and estimated 1RM are untouched.
The swap changes today’s workout only. On the summary, LiftLoggr lists it under Routine changed (for example “Swapped Barbell Bench Press → Dumbbell Bench Press”) with Update routine or Keep original. Pick Update routine to make the dumbbells your bench day from now on.
Two dumbbell details: log the weight of one dumbbell, and turn on Count both dumbbells in volume in Settings if you want volume totals to count both hands. Dumbbells also jump in 2 kg steps, so when one step is more than 10% of the load, LiftLoggr’s double progression adds reps first (up to an expanded top of the range) before it adds weight.
Common mistakes
- Chasing the barbell number with dumbbells. You will lift less. That is the stability cost, not lost strength.
- Swapping and changing everything else. New exercise, same sets, same rep range, same rest.
- Going too steep on the incline. At 60° it is mostly a shoulder press.
- Leaving push-ups easy. If you can do more than 20, add load or slow the lowering.
When you want to know where your barbell bench stands before or after a block of alternatives, the bench press 1RM calculator and the bench warm-up calculator use the same maths as the app. Shoulder pressing has its own options in overhead press alternatives.
Questions
What is the best alternative to the bench press?
The Dumbbell Bench Press. It keeps the same lying horizontal press and works the chest and front delts about as hard. In Saeterbakken 2011 pectoralis and anterior deltoid activity did not differ between barbell, Smith machine and dumbbells. You will lift less: the dumbbell 1RM was 17% below the barbell.
Can push-ups replace the bench press?
For muscle and general strength, yes, if you make them hard. Band-resisted push-ups at a 6RM effort raised bench 1RM as much as 6RM benching over five weeks (Calatayud 2015). Ten easy push-ups won't. Add a band, a plate on your back or a deficit until 6 to 15 reps is hard.
What can I do instead of bench press with shoulder pain?
Try the Dumbbell Floor Press first: the floor stops your elbows before the bottom position that most often aggravates the shoulder. A neutral grip and a 30° incline are the next options. Pain that persists or gets worse needs a clinician, not a new exercise.
How heavy should my dumbbells be compared with my barbell bench?
Start each dumbbell at about 35 to 40% of your barbell working weight. 80 kg for 8 on the bar points to roughly 28 to 32 kg dumbbells for the same reps. Do the first session at 2 to 3 reps in reserve and adjust from there.
Will switching exercises ruin my bench progress?
Not if you swap on purpose. A systematic review found planned exercise variation works as well as or better than a fixed exercise; random switching every session is what hurts (Kassiano 2022). Keep the swap for a full block of 4 to 8 weeks.
Sources
- Saeterbakken et al. 2011, muscle activity and 1RM in Smith, barbell and dumbbell chest press (J Sports Sci) pubmed.ncbi.nlm.nih.gov
- Calatayud et al. 2015, bench press and push-up at comparable muscle activity give similar strength gains (J Strength Cond Res) pubmed.ncbi.nlm.nih.gov
- Kikuchi & Nakazato 2017, low-load bench press and push-up give similar hypertrophy and strength (J Exerc Sci Fit) pubmed.ncbi.nlm.nih.gov
- Rodríguez-Ridao et al. 2020, five bench inclinations and pectoralis, deltoid and triceps EMG (IJERPH) pubmed.ncbi.nlm.nih.gov
- Kassiano et al. 2022, does varying exercises improve hypertrophy and strength? Systematic review (J Strength Cond Res) pubmed.ncbi.nlm.nih.gov