Key takeaways
- 01Straight sets do most of the work. Every other set type is a tool, not a requirement.
- 02Drop set: same exercise, lighter weight, no rest. Superset: two exercises, back to back.
- 03Research: drop sets and supersets build about as much muscle as straight sets, in less time.
- 04LiftLoggr logs warm-up, working and drop sets, and supersets of two or three exercises, natively.
On this page
A drop set is one exercise taken past its first failure point by stripping weight and continuing with no rest; a superset is two exercises done back to back before you rest. Both save time and build about as much muscle as straight sets, but most of your training should still be straight sets: same weight, full rest, repeat.
This page covers the eight set types you’ll meet in programs and apps, what each is for, how to write it in a log, and which ones LiftLoggr records natively.
The eight set types at a glance
| Set type | What you do | Rest | Best for | LiftLoggr |
|---|---|---|---|---|
| Straight set | Same weight, same target reps, every set | Full rest between sets | Main lifts, all goals | Native: working set |
| Warm-up set | Lighter ramp before the first working set | Short | Grooving the lift, preparing joints | Native: warm-up set, built from the first working set |
| Drop set | Set to near failure, strip ~20%, keep going | None before the drop | Last set of isolation work | Native: drop set, no auto-rest before it |
| Superset | Two exercises back to back | After the pair | Saving time, antagonist pairs | Native: 2 exercises, labelled A1/A2 |
| Tri-set / giant set | Three, or four or more, exercises in a row | After the round | Circuits, conditioning-style sessions | Native up to 3 exercises; 4+ logged as separate exercises |
| Rest-pause | One set split by 10–20 s pauses, same weight | Very short inside the set | Squeezing more reps from one weight | Log as working sets plus a note |
| Myo-reps | Activation set, then mini-sets of a few reps | A few breaths | Time-efficient hypertrophy work | Log as working sets plus a note |
| AMRAP | As many reps as possible at a set weight | Full rest | Testing, top sets in 5/3/1 | Write AMRAP in the scheme; logged as a working set |
Straight sets
Pick a weight, do your target reps, rest fully, repeat. 3 × 8 @ 80 kg is three straight sets.
Straight sets are the default because they’re easy to progress and easy to compare. Every other set type changes something (load, rest, order) that makes week-to-week comparisons harder. Keep heavy compound lifts as straight sets.
Barbell Bench Press 3 × 6–8
80 × 8 @2
80 × 8 @1
80 × 7 @0
Warm-up sets
Lighter sets before the first working set. They don’t count as work and should be marked so they don’t inflate your volume or your records.
Barbell Back Squat (High Bar)
W 20 × 8 W 60 × 5 W 80 × 3
100 × 8 @2 100 × 8 @1 100 × 7 @0
How many and how heavy: warm-up sets and the warm-up calculator.
Drop sets
Finish a set close to failure, cut the weight by about 20 to 30%, and go again immediately. One or two drops is plenty.
Cable Lateral Raise
12.5 × 12 @1
12.5 × 11 @0
D 7.5 × 10 @0
Evidence. Sødal et al. (2023) pooled the trials comparing drop sets with traditional sets and found no significant difference in muscle growth. Some drop-set protocols took a half to a third of the time. Enes et al. (2021) found the same for hypertrophy with total volume equalised.
Use them on the last set of an isolation exercise when time is short. Skip them on heavy barbell lifts: form degrades and there’s nothing to gain.
Full method and logging: how to log drop sets.
Supersets
Two exercises, back to back, then rest. Written A1 and A2. The common pairings:
| Pairing | Example | Effect |
|---|---|---|
| Antagonist | Barbell Bench Press + Barbell Bent Over Row | Each muscle rests while the other works. Saves time with little loss of reps. |
| Upper + lower | Dumbbell Overhead Press (Standing) + Lying Leg Curl | Unrelated muscles. Easy time saver. |
| Same muscle (compound set) | Dumbbell Bench Press + Push-Up | More fatigue in one muscle. Fewer total reps. |
| Pre-exhaust | Leg Extension + Leg Press | Isolation first, then a compound for the same muscle. |
Evidence. Zhang et al. (2025) reviewed 19 studies. Supersets gave similar total reps and volume load in shorter sessions. Antagonist pairs allowed more reps than traditional sets; pairs that hit similar muscles reduced volume load. Strength and muscle growth were similar to traditional training, though only three long-term studies were available.
A1 Dumbbell Bicep Curl (Standing) 14 × 10 @1
A2 Cable Triceps Pushdown (Rope) 25 × 12 @1
rest 90 s
A1 14 × 9 @0
A2 25 × 11 @1
Full method: how to log supersets.
Tri-sets and giant sets
Three exercises in a row is a tri-set; four or more is usually called a giant set or a circuit. Rest comes after the full round. They’re efficient for accessory work and conditioning, and poor for heavy strength work because fatigue carries from one exercise to the next.
LiftLoggr groups up to three adjacent exercises (A1, A2, A3), alternates between them, and rests after each round. A fourth exercise falls out of the group. For a four-exercise circuit, log the first three as a group and the fourth as its own exercise, or split it into two pairs. Some other apps, including Strong and Hevy, let you group more exercises as a circuit.
Rest-pause sets
One weight, one long set, split by short pauses. A common format: take a set close to failure, rack it, breathe for 10 to 20 seconds, then do as many more reps as you can with the same weight. Repeat once or twice.
Machine Chest Press 60 kg
12 @0 · 15 s · 4 · 15 s · 2 (RP, 18 total)
Evidence. Enes et al. (2021) compared rest-pause, drop sets and traditional sets with total volume matched in trained men over 8 weeks. Muscle thickness gains were similar across groups; rest-pause gave slightly greater squat strength gains than traditional sets.
In LiftLoggr: there’s no rest-pause set type. Log the main set and each mini-set as working sets at
the same weight, and write RP 15 s in the exercise note. The rest timer starts after each check, so
tap Stop when you go straight into the next mini-set.
Myo-reps
A structured cousin of rest-pause. Do an activation set of roughly 12 to 20 reps close to failure, then mini-sets of 3 to 5 reps with only a few breaths between. Stop when a mini-set falls short of the target.
Leg Extension 50 kg
activation 16 @1
mini 5 · 5 · 4 · 3 (stop: under 4)
Log it the same way as rest-pause: working sets plus a Myo note.
AMRAP sets
As many reps as possible at a fixed weight, with good form. Programs like 5/3/1 use them as the last set of the day; they also work as a rep-max test.
Barbell Overhead Press (Strict) 5/3/1 week 1, training max 60 kg
40 × 5 45 × 5 50 × 9 (AMRAP) 65 / 75 / 85%, rounded to 2.5 kg
In LiftLoggr: write AMRAP in the routine’s scheme label (for example 3 × 5+ AMRAP). The set is
logged as a normal working set with the reps you actually did. LiftLoggr doesn’t auto-progress the
weight on AMRAP or max schemes; you set the next weight, which is what programs like 5/3/1 expect.
The 5/3/1 calculator works out the percentages.
What about failure sets?
Some apps have a “failure” tag. LiftLoggr uses reps in reserve instead: log 0 and the set is marked
as taken to failure, with the same scale you use for every other set. Zourdos et al. (2016) showed
lifters rate reps in reserve most accurately on sets close to failure. See
RIR vs RPE.
How LiftLoggr handles set types
- Set type per set. In the routine editor each set is Working, Warm-up or Drop. During a workout, long-press a set and choose Add drop set; warm-ups come from the exercise menu’s Add warm-up sets.
- Rest that follows the set type. The auto rest timer starts when you check a set, except before an unchecked drop set and between exercises in a superset. Superset rest starts after the round.
- Progression that ignores the extras. Double progression only moves working sets. Warm-ups and drop sets copy last time’s same-type set.
- Clean history. Warm-ups are excluded from estimated 1RM and records. The CSV export has a
set_typecolumn (normal,warmup,drop) and asupersetletter.
Choosing a set type: a quick guide
| Goal | Use |
|---|---|
| Get stronger on a main lift | Straight sets. Warm-ups first. |
| Finish a session in 45 minutes | Antagonist supersets for accessories |
| Extra stimulus on a small muscle | One drop set on the last set |
| More reps from a light machine | Rest-pause or myo-reps |
| Test progress or follow 5/3/1 | One AMRAP top set |
| Conditioning-style day | Tri-sets or a circuit |
Mistakes
- Drop sets on everything. One per exercise, on isolation work, at the end.
- Supersetting two heavy compounds. Squat into deadlift gets you two worse lifts.
- Not marking the set type. An unmarked drop set looks like a terrible working set and drags your progression down.
- Counting warm-ups as volume. Mark them, then decide whether totals include them.
- Changing the set type every week. You can’t compare a straight-set week with a rest-pause week. Keep a block consistent.
Questions
What is the difference between a drop set and a superset?
A drop set is one exercise: you finish a set, strip weight and keep going with no rest. A superset is two exercises done back to back, then you rest. Drop sets extend one set; supersets pair two.
Are drop sets better for muscle growth than normal sets?
Not better, but faster. A 2023 meta-analysis found no significant difference in muscle growth between drop sets and traditional sets, and some drop-set protocols took a half to a third of the time.
What is the difference between rest-pause and myo-reps?
Both split one hard set into a main set plus short mini-sets. Rest-pause usually pauses 10 to 20 seconds and repeats with the same weight. Myo-reps is a structured form: a high-rep activation set, then mini-sets of a few reps with a few breaths between.
How many sets should be drop sets or supersets?
Few. Use drop sets on the last set of an isolation exercise and supersets where they save time without stealing from your main lifts. Keep heavy squats, deadlifts and presses as straight sets.
Does LiftLoggr support rest-pause, myo-reps or AMRAP sets?
Not as separate set types. Log them as working sets with a note, or write AMRAP in the routine's scheme. LiftLoggr natively logs warm-up, working and drop sets, plus supersets of two or three exercises.
Sources
- Sødal et al. 2023, Effects of drop sets on skeletal muscle hypertrophy: systematic review and meta-analysis (Sports Med Open) pubmed.ncbi.nlm.nih.gov
- Zhang et al. 2025, Superset versus traditional resistance training prescriptions: systematic review and meta-analysis (Sports Med) pubmed.ncbi.nlm.nih.gov
- Enes et al. 2021, Rest-pause and drop-set training vs traditional sets in resistance-trained males (Appl Physiol Nutr Metab) pubmed.ncbi.nlm.nih.gov
- Zourdos et al. 2016, a resistance-training RPE scale measuring repetitions in reserve (J Strength Cond Res) pubmed.ncbi.nlm.nih.gov