45 · 45 lb per side
225 lb = bar 45 lb + 2 × 90 lb
- 45 lb× 2
Same plate maths as the plate readout in LiftLoggr: largest plates first, and the nearest loadable weight (ties go down) when the target can't be loaded.
Key takeaways
- 01Plates per side = (total − bar) ÷ 2.
- 02Defaults: 20 kg bar with 25 to 1.25 kg plates, or 45 lb bar with 45 to 2.5 lb plates.
- 03Not loadable? You get the nearest total you can build. Ties go down.
- 04Same rules as the plate readout in the LiftLoggr app.
On this page
Plates per side are the bar total minus the bar, divided by two. For 100 kg on a 20 kg bar that is 40 kg a side: 25 + 15. For 225 lb on a 45 lb bar it is 90 lb a side: 45 + 45.
The calculator above does it for any total, in kg or lb, with your own bar and your own plates. When a total can’t be built from what you have, it shows the nearest one that can.
How to use it
- Pick kg or lb. The plate set and bar presets switch with the unit.
- Pick the bar: 20, 15, 10 or 0 kg, or 45, 35, 25 or 0 lb, or type a custom weight for an EZ bar or trap bar. Use 0 for a loaded machine with no bar weight of its own.
- Untick plates your gym doesn’t have. Plates have no count limit: if a plate is ticked, the calculator assumes there are enough pairs.
- Type the total. Read one side, largest plate first. Load the other side the same.
The URL updates as you type. Copy it to share a setup with a training partner, or bookmark your gym.
The rules, exactly
These are the rules of PlateMath in the LiftLoggr app. The calculator runs a port of that code and
is tested against the same fixture file as the iPhone and Android apps.
| Rule | kg | lb |
|---|---|---|
| Default bar | 20 kg | 45 lb |
| Bar presets (app) | 20 · 15 · 10 · 0 | 45 · 35 · 25 · 0 |
| Default plates | 25 · 20 · 15 · 10 · 5 · 2.5 · 1.25 | 45 · 35 · 25 · 10 · 5 · 2.5 |
| Optional extra plate | 0.5 | 1.25 |
| Smallest jump with defaults | 2.5 kg | 5 lb |
| No readout above | 1000 kg | 1000 lb |
- Exact maths. Every weight is handled in hundredths of the unit, so 102.5 kg and 227.5 lb compare exactly. No rounding drift.
- Largest plates first. Of every combination that adds up to the side, it picks the one with the most of the biggest plate, then the next, and so on. That is the greedy answer whenever greedy works, and still finds 15 + 15 when only 20s and 15s are ticked and the side needs 30.
- Below the bar and bar only are reported as such. No plates needed.
- Not loadable. If the side can’t be built, or the plates would be uneven, it finds the nearest total below and above. The nearer one wins; a tie goes to the lighter weight.
Two web-only extras: a custom bar weight, and collars. Enter each collar’s weight and the calculator adds two of them to the bar. With a preset bar and collars at 0, the answer is exactly what the app shows.
Worked examples
Default plates, default bar.
| Total | Bar | Per side | Plates per side |
|---|---|---|---|
| 60 kg | 20 kg | 20 kg | 20 |
| 100 kg | 20 kg | 40 kg | 25 · 15 |
| 102.5 kg | 20 kg | 41.25 kg | 25 · 15 · 1.25 |
| 140 kg | 20 kg | 60 kg | 25 · 25 · 10 |
| 140 kg | 15 kg | 62.5 kg | 25 · 25 · 10 · 2.5 |
| 180 kg | 20 kg | 80 kg | 25 · 25 · 25 · 5 |
| 135 lb | 45 lb | 45 lb | 45 |
| 225 lb | 45 lb | 90 lb | 45 · 45 |
| 315 lb | 45 lb | 135 lb | 45 · 45 · 45 |
| 405 lb | 45 lb | 180 lb | 45 · 45 · 45 · 45 |
Totals that can’t be built:
| You type | Below | Above | Shown |
|---|---|---|---|
| 101 kg | 100 kg | 102.5 kg | 100 kg (1 kg away vs 1.5 kg) |
| 183 kg | 182.5 kg | 185 kg | 182.5 kg |
| 227 lb | 225 lb | 230 lb | 225 lb |
| 231 lb | 230 lb | 235 lb | 230 lb |
Bars are not all 20 kg
The calculator only knows the bar you give it. Check the bar before you trust the plates.
| Bar | Typical weight |
|---|---|
| Men’s Olympic / powerlifting bar | 20 kg (44.1 lb) |
| Women’s Olympic bar | 15 kg (33 lb) |
| US standard bar | 45 lb (20.4 kg) |
| Technique or junior bar | 10 kg or 5 kg |
| EZ curl bar, fixed barbells | Varies: often 7 to 12 kg. Weigh it or read the sleeve |
| Smith machine, trap bar, safety squat bar | Varies by brand. Don’t assume 20 kg |
A 45 lb bar is 20.4 kg, not 20. Mixing a lb bar with kg plates puts you 0.4 kg off. That’s nothing for a set of eight and worth knowing for a record. Full table and how to check an unmarked bar: how much does a barbell weigh.
Limits
- Plates are assumed unlimited. If your gym has one pair of 25s, the answer can ask for more than you own. Untick the plate and recalculate.
- Calibrated vs iron plates. Cheap iron plates can be several percent off their label. The calculator trusts the label.
- Fractional plates. 0.5 kg and 1.25 lb plates are off by default because most gyms don’t have them. Tick them if yours does.
- Machines. Leg presses and hack squats are loaded on a sled whose weight is rarely posted. Use a 0 bar and track the plates; the number is for your log, not for comparison.
In the app
LiftLoggr shows the same plate readout under every barbell set while you train, with your saved bar and plates. Change the weight and the plates update. The warm-up calculator uses the same rules to build each warm-up set, so every ramp step is something you can actually load.
Questions
How do I work out plates per side?
Subtract the bar from the total and halve it. 100 kg on a 20 kg bar leaves 80 kg, so 40 kg per side: one 25 and one 15.
How much is 2, 3 or 4 plates?
In a US gym, "plates" means 45 lb plates per side on a 45 lb bar: 1 plate is 135 lb, 2 plates 225 lb, 3 plates 315 lb, 4 plates 405 lb. With 20 kg plates on a 20 kg bar: 60, 100, 140 and 180 kg.
Why can't I load 101 kg?
With 1.25 kg as the smallest plate, totals go up in 2.5 kg steps (one 1.25 kg plate each side). 101 kg sits between 100 and 102.5 kg. The calculator shows 100 kg, the nearer one.
Should I count the collars?
Spring clips weigh almost nothing; ignore them. Competition collars weigh 2.5 kg each, so a bar with collars is 25 kg. Enter the collar weight in the web calculator, or add it to the bar. The LiftLoggr app has no collar setting.
My gym only has 20 kg and 15 kg plates. Can I still load 80 kg?
Yes. 80 kg on a 20 kg bar is 30 kg per side: 15 + 15. The calculator searches every combination, so it finds that even though 20 + 10 isn't available.
Sources
- IPF Technical Rules (bar 20 kg, collars 2.5 kg each) powerlifting.sport