4 warm-up sets before 115 lb
| Set | Weight | Reps | Per side (lb) |
|---|---|---|---|
| Warm-up 1 | 45 lb | 10 | Bar only |
| Warm-up 2 | 55 lb | 5 | 5 |
| Warm-up 3 | 80 lb | 3 | 10 · 5 · 2.5 |
| Warm-up 4 | 100 lb | 1 | 25 · 2.5 |
| Working set | 115 lb | — | 35 |
Bar × 10, then 50 % × 5 and 70 % × 3, plus 85 % × 1 when the working weight is at least twice the bar. Each load is the nearest one your plates make (ties go down).
Light top sets: the 85 % single only appears once the working weight is at least twice the bar.
The same ramp LiftLoggr builds from your first working set.
Key takeaways
- 01Press ramp: bar × 10, 50 % × 5, 70 % × 3, 85 % × 1 of the first working set.
- 02Under 40 kg or 90 lb, the ramp shrinks: 85 % needs a work set at least twice the bar.
- 03Every step is 2.5 kg or 5 lb at the smallest. Tick 0.5 kg plates if you have them.
- 04Squeeze the glutes and keep the ribs down on every warm-up rep.
On this page
For the overhead press, warm up with the bar for 10, then 50 % × 5, 70 % × 3 and 85 % × 1 of your first working set. At 60 kg that’s 20 × 10, 30 × 5, 42.5 × 3, 50 × 1; at 135 lb it’s 45 × 10, 65 × 5, 95 × 3, 115 × 1.
The calculator above is set to the overhead press. Pressing weights are light, so the ramp often has fewer steps than on squats or deadlifts. The tables below show why.
Press ramps, worked out
Default 20 kg or 45 lb bar, standard plates.
| Working set | Warm-ups | Plates per side | Work set plates |
|---|---|---|---|
| 35 kg | 20 × 10 · 25 × 3 | — · 2.5 | 5 + 2.5 |
| 40 kg | 20 × 10 · 27.5 × 3 · 35 × 1 | — · 2.5 + 1.25 · 5 + 2.5 | 10 |
| 50 kg | 20 × 10 · 25 × 5 · 35 × 3 · 42.5 × 1 | — · 2.5 · 5 + 2.5 · 10 + 1.25 | 15 |
| 60 kg | 20 × 10 · 30 × 5 · 42.5 × 3 · 50 × 1 | — · 5 · 10 + 1.25 · 15 | 20 |
| 70 kg | 20 × 10 · 35 × 5 · 50 × 3 · 60 × 1 | — · 5 + 2.5 · 15 · 20 | 25 |
| 30 kg, 15 kg bar | 15 × 10 · 20 × 3 · 25 × 1 | — · 2.5 · 5 | 5 + 2.5 |
| 95 lb | 45 × 10 · 65 × 3 · 80 × 1 | — · 10 · 10 + 5 + 2.5 | 25 |
| 115 lb | 45 × 10 · 55 × 5 · 80 × 3 · 100 × 1 | — · 5 · 10 + 5 + 2.5 · 25 + 2.5 | 35 |
| 135 lb | 45 × 10 · 65 × 5 · 95 × 3 · 115 × 1 | — · 10 · 25 · 35 | 45 |
Why light presses lose steps
The calculator uses the app’s rules, and three of them bite at pressing weights:
- The 85 % single needs a work set at least twice the bar: 40 kg on a 20 kg bar, 90 lb on a 45 lb bar. At 35 kg there is no 85 % set.
- A warm-up at or below the bar is dropped. At 40 kg, 50 % is exactly 20 kg, the bar, so the 50 % set goes.
- Ties go to the lighter weight. At 95 lb, 50 % is 47.5 lb: halfway between the bar and 50 lb, so it rounds to 45, which is the bar, and is dropped too. At 115 lb, 50 % is 57.5: it rounds down to 55.
Fewer warm-ups at light weights is fine. The bar set and one or two heavier sets cover a 35 kg press.
Small plates matter here
With 1.25 kg as the smallest plate, every jump is at least 2.5 kg. On a 40 kg press that’s over 6 % a step, a big jump for a lift that gains slowly. If your gym has 0.5 kg plates, tick them in the calculator: the work sets can then go up by 1 kg. For warm-ups, round numbers are fine; there’s no need to load 0.5 kg plates on a 50 % set.
What each press set is for
| Set | What to check |
|---|---|
| Bar × 10 | Grip just outside the shoulders, forearms vertical. Bar starts on the front of the shoulders. |
| 50 % × 5 | Glutes squeezed, ribs down. Move the head back, press, then push the head through at the top. |
| 70 % × 3 | Bar path straight up over mid-foot. If it drifts forward, the face is in the way: move it. |
| 85 % × 1 | One rep exactly like a work rep: brace, press, lock out with biceps by the ears. |
Heavy press cues
- Squeeze the glutes and brace. A standing press with soft glutes turns into a lean-back and a standing incline press.
- Bar close to the face. Chin back on the way up, head through once the bar passes the forehead.
- Lock out overhead, shrugging up at the top. The bar finishes over the middle of the foot.
- No knee dip. That’s a push press. Fine as a lift, but log it as one.
Safety
- Unrack from shoulder height. Set the J-hooks at collarbone height so you don’t press the bar out of the rack or stand up with it from a squat.
- Fail by stepping back, letting the bar return to the shoulders, or by lowering it to the safeties. Don’t press heavy weight behind the neck.
- Lower back pain on the press usually means too much lean. Lower the weight before adding sets.
Limits
Seated and strict presses use the same ramp on a 20 kg bar. Dumbbell shoulder presses use the dumbbell rule instead: 50 % × 8 and 75 % × 4, rounded to 2 kg or 5 lb.
In the app
In LiftLoggr, turn on Auto warm-up sets for the overhead press in the routine editor, or tap Add warm-up sets on the exercise during a workout. The app builds this ramp from that day’s first working set and shows the plates under every set. Warm-ups never count toward your records.
Questions
How many warm-up sets should I do for overhead press?
Two to four, depending on the weight. A 60 kg press gives 20 × 10, 30 × 5, 42.5 × 3, 50 × 1. A 35 kg press gives just 20 × 10 and 25 × 3, because the other steps would land on the bar or repeat a weight.
Why does the calculator skip the 50 % set at 40 kg?
50 % of 40 kg is 20 kg, the bar itself. A warm-up at the bar weight is already done as the bar set, so it is dropped. You get 20 × 10, 27.5 × 3, 35 × 1.
Do I need to warm up my shoulders before pressing?
The bar set does most of it. If your shoulders feel tight overhead, add band pull-aparts or a second bar set. If pressing overhead hurts, fix that before you add weight.
Do I need a full ramp if I already benched?
No. The shoulders and triceps are warm. Start at the 70 % set, or at 50 % if the bar path felt off.
Should I warm up seated or standing?
The same way you'll do the work sets. Standing presses need the brace and the glutes; seated presses don't. Rehearse the version you're about to load.
Sources
- Ribeiro et al. 2020, The role of specific warm-up during bench press and squat pubmed.ncbi.nlm.nih.gov
- Abad et al. 2011, General and specific warm-ups and leg-press 1RM pubmed.ncbi.nlm.nih.gov