Get the app (opens the App Store in a new tab)

Guides

How to log drop sets so they don't wreck your numbers

One line per drop, marked as a drop, so your working sets stay comparable.

Key takeaways

  1. 01Log every drop as its own set: weight × reps, marked D, right after its parent set.
  2. 02Drop about 20 to 30% per step. One or two drops is enough.
  3. 03No rest before a drop; rest after the last one.
  4. 04Keep drops out of your progression decisions. Compare working sets with working sets.
On this page

Log a drop set as separate lines, one per drop, directly after the set it drops from: weight × reps for each, and a mark that says it’s a drop (D on paper, the drop set type in an app). Don’t rest before a drop, and rest normally after the last one.

That way your working sets stay comparable from week to week, and the drops sit beside them as extra work instead of looking like terrible sets.

The notation

Dumbbell Lateral Raise   3 × 10–15
   12 × 14 @1
   12 × 13 @0
D   8 × 10 @0
D   5 × 8  @0
Mark Meaning
No mark Working set, full rest before it
D Drop set: same exercise, lighter, no rest before it
@0 Zero reps in reserve: taken to failure
D D Double drop: two drops in a row

The parent set (12 × 13 @0) is a normal working set. It’s what you compare with last week. The two D lines are the extra.

What not to do

Wrong Why it hurts Right
12 × 13 + 8 × 10 on one line Next week you can’t tell what the working set was Two lines, second marked D
12 × 23 Adds reps from two weights into a fake set 12 × 13, then D 8 × 10
Drop not marked An 8 kg set looks like a collapse; progression rules hold your weight back Mark it D
A drop logged as the next working set Shifts every set number after it Insert it after its parent

How much to drop

Drop about 20 to 30% per step. Bigger drops let you get more reps; smaller ones keep the load heavier. Round down to something you can load in seconds.

Starting weight −20% −25% −30%
100 kg 80 kg 75 kg 70 kg
60 kg 48 kg 45 kg 42 kg
30 kg dumbbells 24 kg 22.5 kg 21 kg
225 lb 180 lb 170 lb 155 lb
50 kg machine stack 40 kg 37.5 kg 35 kg

The 225 lb row is rounded to 5 lb: 168.75 lb becomes 170 lb and 157.5 lb becomes 155 lb.

Set up for a fast strip:

  • Barbell: load the plates you’ll strip on the outside, collars loose, a partner on the other side.
  • Dumbbells: pick your two lighter pairs before you start (“running the rack”).
  • Machines and cables: best for drop sets. Move the pin and go.

Where drop sets fit

Use one drop set on the last set of an isolation exercise: lateral raises, curls, pushdowns, leg extensions, cable flyes. Skip them on heavy barbell squats, deadlifts and bench presses, where form breaks down before the muscle does.

Do they work? Sødal et al. (2023) pooled the trials and found no significant difference in muscle growth between drop sets and traditional sets; some drop-set protocols took a half to a third of the time. Enes et al. (2021) found similar hypertrophy for drop sets and traditional sets with total volume matched. Drop sets are a time saver, not a growth hack.

How to log drop sets in LiftLoggr

Drop sets are a native set type in the iPhone app.

In a workout:

  1. Do the working set and tap its circle.
  2. Long-press that set and choose Add drop set. A new set appears right after it, labelled DROP, with the same reps and about 80% of the weight.
  3. Adjust the weight if you dropped more or less, then tap the circle when it’s done.
  4. For a double drop, long-press the drop set and add another. Each new drop starts at about 80% of the one before it.

To remove one, long-press the drop set and choose Remove drop set.

In a routine: in the routine editor, set the type of any set to Drop. Every session of that routine then starts with the drop already in place.

What the app does with them

Behaviour Detail
Pre-filled weight About 80% of the set before, rounded down to something loadable
Barbell Snapped to your bar and plates: 100 kg → 80 kg; 102.5 kg → 80 kg; 225 lb → 180 lb
Dumbbells In 2 kg steps: 22 kg → 16 kg
Machines and cables In 2.5 kg or 5 lb steps: 50 kg → 40 kg; 100 lb → 80 lb
Rest timer Doesn’t start when the next set is an unchecked drop. Starts after the last drop.
Progression Double progression moves working sets only. Drops copy last time’s drop.
Reps in reserve Can be logged on drop sets, like any working set
Export set_type column reads drop in the history CSV

That rest rule matters more than it looks. A timer that fires between a set and its drop is the most common way apps get drop sets wrong; you end up dismissing it with sweaty hands every time.

In other apps

Strong and Hevy both tag drop sets by tapping the set number (checked 2026-11-14). Strong describes drop sets as a series of sets performed without resting; Hevy’s help centre notes that its rest timer won’t start if the next set is a drop set. On paper, the D notation above does the same job.

Logging a full drop-set finisher

A real final exercise, written the way it should look in your history:

Set Type Weight Reps RIR
1 Working 30 kg 12 2
2 Working 30 kg 11 1
3 Working 30 kg 10 0
4 Drop 22.5 kg 9 0
5 Drop 15 kg 10 0

That is Cable Triceps Pushdown (Rope), 3 × 10–12 with a double drop on the last set. Next session, progression looks only at sets 1 to 3: they didn’t all reach 12, so the weight stays at 30 kg. The drops are there when you want to see them, and out of the way when you don’t.

Mistakes

  • Drop sets every set. You’ll be too tired for the working sets that drive progress. Last set only.
  • Resting before the drop. Even 30 seconds turns it into a lighter straight set.
  • Dropping too little. A 5% drop gets you one or two reps. Go 20% or more.
  • Not marking drops. Your log will say you got weaker.
  • Counting each drop as a full set when you total weekly volume. It inflates your numbers.

Questions

Do I log a drop set as one set or several?

Several. Each drop is its own line with its own weight and reps, marked as a drop. Writing 80 × 8 + 60 × 6 as one set hides the weight change and breaks comparisons with last week.

How much weight should I drop?

About 20 to 30% per drop. From 100 kg, drop to 75 to 80 kg. Round down to what you can load quickly. LiftLoggr pre-fills about 80% of the set before, rounded down to a weight your plates or dumbbells can make.

Do drop sets count toward my weekly sets?

A simple rule: count the parent set and its drops as one hard set, or one and a half at most. They add effort, but far less than a full extra set with full rest.

Should drop sets count for personal records?

Not for weight records, since the weight is lower by design. Rep records at a drop weight are real but not comparable to fresh sets. Keep drops marked so they don't get mixed in.

Sources

  1. Sødal et al. 2023, Effects of drop sets on skeletal muscle hypertrophy: systematic review and meta-analysis (Sports Med Open) pubmed.ncbi.nlm.nih.gov
  2. Enes et al. 2021, Rest-pause and drop-set training vs traditional sets in resistance-trained males (Appl Physiol Nutr Metab) pubmed.ncbi.nlm.nih.gov
  3. Strong help centre: About warm-up, drop sets and failure sets (checked 2026-11-14) help.strongapp.io
  4. Hevy help centre: Set types explained (checked 2026-11-14) help.hevyapp.com