Key takeaways
- 01Label the pair A1 and A2. A second pair is B1 and B2.
- 02Log each exercise under its own name, so its history stays its own.
- 03Alternate A1, A2, A1, A2. Rest only after A2.
- 04Antagonist pairs keep your reps up; same-muscle pairs cut them.
On this page
Log a superset as two separate exercises labelled A1 and A2, each with its own weight and reps, in the order you did them: A1 set 1, A2 set 1, rest, A1 set 2, A2 set 2, rest. Rest only after the second exercise of each round.
Keeping the exercises separate is the key. Each one keeps its own history, records and progression; the label just tells you, and your app, to alternate.
The notation
| Label | Means |
|---|---|
A1, A2 |
First superset: alternate these two |
A1, A2, A3 |
Tri-set: three exercises in a row, then rest |
B1, B2 |
Second superset in the session |
C |
A normal exercise, done on its own |
A full session on paper:
Upper B kg
A1 Barbell Bench Press 3 × 6–8 80 × 8 @2 80 × 8 @1 80 × 7 @0
A2 Barbell Bent Over Row 3 × 8–10 70 × 10 @2 70 × 10 @1 70 × 9 @1
rest 2:00 after each A2
B1 Dumbbell Bicep Curl (Standing) 3 × 10–12 14 × 12 @2 14 × 11 @1 14 × 10 @0
B2 Cable Triceps Pushdown (Rope) 3 × 10–12 25 × 12 @2 25 × 12 @1 25 × 11 @1
rest 1:30 after each B2
C Face Pull 2 × 15 20 × 15 20 × 15
In the order you actually lifted:
| # | Label | Exercise | Weight | Reps | Rest after |
|---|---|---|---|---|---|
| 1 | A1 | Barbell Bench Press | 80 kg | 8 | none, go to A2 |
| 2 | A2 | Barbell Bent Over Row | 70 kg | 10 | 2:00 |
| 3 | A1 | Barbell Bench Press | 80 kg | 8 | none |
| 4 | A2 | Barbell Bent Over Row | 70 kg | 10 | 2:00 |
| 5 | A1 | Barbell Bench Press | 80 kg | 7 | none |
| 6 | A2 | Barbell Bent Over Row | 70 kg | 9 | 2:00 |
How long to rest
Rest after the round, not between exercises. Moving between the two takes 15 to 30 seconds anyway, and that’s enough for an antagonist pair.
| Pair | Example | Rest after the round |
|---|---|---|
| Antagonist, isolation | Curl + pushdown | 60–90 s |
| Antagonist, compound | Bench press + row | 90–150 s |
| Upper + lower | Overhead press + leg curl | 90–120 s |
| Same muscle | Leg extension + leg press | 2–3 min |
What the research says. Zhang et al. (2025) pooled 19 studies. Supersets gave similar total reps and volume load to traditional sets, in shorter sessions. Antagonist pairs let lifters complete more reps than traditional sets; pairs that hit similar muscles reduced volume load. Long-term strength and muscle gains were similar, though only three long-term studies were available.
Pairing rules
- Pair antagonists or unrelated muscles. Press and row, curl and pushdown, overhead press and leg curl.
- Don’t pair two heavy lifts that share a limiting muscle. Squat and deadlift both fry the lower back. Both will be worse.
- Set up both stations first. If someone takes your bench mid-superset, it’s over.
- Keep the same pair for a block. Swapping partners each week changes your rep counts and makes comparisons noisy.
How to log supersets in LiftLoggr
Supersets of two or three exercises are native in the iPhone app.
In a workout:
- Open the ⋯ menu on the first exercise and tap Superset with next. It pairs with the exercise below it.
- Both cards get a shared bar on the left and the labels A1 and A2. A second pair becomes B1 and B2.
- Log as usual. When you check A1, the app opens A2’s card; when you check A2, it opens A1’s next set.
- To undo, choose Remove from superset in the same menu.
A superset made mid-workout applies to that session. When you finish, the routine-change summary lists “Supersets changed” so you can keep the pairing in the routine or leave it as a one-off.
In a routine: in the routine editor, turn on Superset with next under an exercise. Every session of that routine then starts paired.
Exact behaviour
| Situation | What LiftLoggr does |
|---|---|
| Rest timer | Doesn’t start until every exercise in the group has done its set for the round, then starts once |
| Which rest time | The rest last used for the exercise that finished the round, else your default |
| Warm-ups | All warm-ups in the group come first, exercise by exercise, and rest as usual |
| Uneven set counts | 3 sets of A1 with 2 of A2: the third A1 set rests on its own |
| Drop sets inside a superset | A drop belongs to its parent’s round: A1, A1 drop, A2, then rest |
| Group size | Up to three adjacent exercises (A1, A2, A3). A fourth stays a normal exercise. |
| Apple Watch, Lock Screen, notifications | Show the label, e.g. A1 · Barbell Bench Press |
| History CSV | A superset column with the group letter (A, B) on each row |
That rest rule is the part that matters mid-session. Many lifters stop using supersets in apps because a timer fires between A1 and A2 and has to be dismissed every round.
In other apps
Strong and Hevy both group exercises into supersets and let you add more than two exercises as a circuit (checked 2026-11-14). Strong’s help centre describes the same order: one set of each exercise, then the next set of each. Hevy has an optional setting that scrolls to the next exercise in the superset when you complete a set. LiftLoggr caps a group at three exercises; for a four-exercise circuit, log a tri-set plus one exercise, or two pairs.
Logging a tri-set
Three exercises, rest after the third:
| Round | A1 Dumbbell Lateral Raise | A2 Face Pull | A3 Dumbbell Bicep Curl (Standing) | Rest |
|---|---|---|---|---|
| 1 | 8 kg × 15 | 20 kg × 15 | 12 kg × 12 | 90 s |
| 2 | 8 kg × 14 | 20 kg × 15 | 12 kg × 11 | 90 s |
| 3 | 8 kg × 12 | 20 kg × 14 | 12 kg × 10 | done |
Each exercise’s history still reads as a normal list of sets: lateral raise 8 × 15, 14, 12. Next time, double progression looks at that list and nothing else.
Mistakes
- One combined line.
Bench/row 80/70 × 8/10can’t be charted or progressed. Two exercises, two histories. - Resting between A1 and A2. Then it’s two straight-set exercises done slowly.
- Supersetting your heaviest lift. Keep the main lift of the day as straight sets with full rest.
- Pairing exercises at opposite ends of the gym. The walk becomes the rest.
- Forgetting the label. Without A1/A2 you’ll wonder why your bench reps dropped the week you paired it with rows.
Questions
What does A1 and A2 mean in a workout?
They mark a superset. Do one set of A1, then one set of A2 with little or no rest, then rest. Repeat for the listed sets. B1 and B2 are the next pair. A plain letter with no number, like C, is a normal exercise.
How long should I rest between supersets?
Rest after each round, not between the two exercises. 60 to 120 seconds after an antagonist pair is typical; take longer when either exercise is a heavy compound lift.
Should I log a superset as one exercise?
No. Log each exercise separately and mark them as a pair. Combining them breaks each exercise's history, its records and its progression.
What is the best superset pairing?
Antagonist pairs such as a press with a row, or curls with pushdowns. A 2025 meta-analysis found antagonist supersets let lifters complete more reps than traditional sets, while pairs that work similar muscles reduced volume load.
Sources
- Zhang et al. 2025, Superset versus traditional resistance training prescriptions: systematic review and meta-analysis (Sports Med) pubmed.ncbi.nlm.nih.gov
- Strong help centre: About supersets and circuits (checked 2026-11-14) help.strongapp.io
- Hevy help centre: The complete guide to supersets (checked 2026-11-14) help.hevyapp.com