4 warm-up sets before 225 lb
| Set | Weight | Reps | Per side (lb) |
|---|---|---|---|
| Warm-up 1 | 45 lb | 10 | Bar only |
| Warm-up 2 | 110 lb | 5 | 25 · 5 · 2.5 |
| Warm-up 3 | 155 lb | 3 | 45 · 10 |
| Warm-up 4 | 190 lb | 1 | 45 · 25 · 2.5 |
| Working set | 225 lb | — | 45 · 45 |
Bar × 10, then 50 % × 5 and 70 % × 3, plus 85 % × 1 when the working weight is at least twice the bar. Each load is the nearest one your plates make (ties go down).
Bar set: full depth, same stance and bar position as your working sets.
The same ramp LiftLoggr builds from your first working set.
Key takeaways
- 01Squat ramp: bar × 10, 50 % × 5, 70 % × 3, 85 % × 1 of the first working set.
- 02Squat every warm-up to the depth you'll use for the work.
- 03Set the safeties during the bar set. Don't move them later.
- 04Belt on for the 70 % or 85 % set, whichever comes first under heavy load.
On this page
For a squat, warm up with the empty bar for 10, then 50 % × 5, 70 % × 3 and 85 % × 1 of your first working set, every rep to full depth. At 140 kg that’s 20 × 10, 70 × 5, 97.5 × 3, 120 × 1.
The calculator above is set to the squat. Enter your first working weight and it gives the ramp, rounded to plates you can load, with the plates per side.
Squat ramps, worked out
Default 20 kg or 45 lb bar, standard plates. The last column is the working set.
| Working set | Warm-ups | Plates per side | Work set plates |
|---|---|---|---|
| 100 kg | 20 × 10 · 50 × 5 · 70 × 3 · 85 × 1 | — · 15 · 25 · 25 + 5 + 2.5 | 25 + 15 |
| 140 kg | 20 × 10 · 70 × 5 · 97.5 × 3 · 120 × 1 | — · 25 · 25 + 10 + 2.5 + 1.25 · 25 + 25 | 25 + 25 + 10 |
| 180 kg | 20 × 10 · 90 × 5 · 125 × 3 · 152.5 × 1 | — · 25 + 10 · 25 + 25 + 2.5 · 25 + 25 + 15 + 1.25 | 25 + 25 + 25 + 5 |
| 225 lb | 45 × 10 · 110 × 5 · 155 × 3 · 190 × 1 | — · 25 + 5 + 2.5 · 45 + 10 · 45 + 25 + 2.5 | 45 + 45 |
| 315 lb | 45 × 10 · 155 × 5 · 220 × 3 · 270 × 1 | — · 45 + 10 · 45 + 35 + 5 + 2.5 · 45 + 45 + 10 + 10 + 2.5 | 45 + 45 + 45 |
| 405 lb | 45 × 10 · 200 × 5 · 285 × 3 · 345 × 1 | — · 45 + 25 + 5 + 2.5 · 45 + 45 + 25 + 5 · 45 + 45 + 45 + 10 + 5 | 45 × 4 |
The rules are the app’s: each percentage is moved to the nearest total your plates can build (ties go to the lighter one), and the 85 % single only appears when the work set is at least twice the bar. The warm-up calculator page lists every rule.
What each squat set is for
| Set | What to check |
|---|---|
| Bar × 10 | Set the safeties: just below the bar at your bottom position. Find your grip, bar position and stance. Sit to full depth and stay a beat. |
| 50 % × 5 | Same walkout every time: unrack, two or three steps back, set the feet. Hit the same depth as the bar set. |
| 70 % × 3 | Belt on if you wear one. Big breath and brace before each rep, not once per set. |
| 85 % × 1 | One rep exactly like a work rep: same walkout, same depth, same speed out of the hole. |
High bar or low bar. Low-bar lifters often need the bar set mostly for the shoulders and wrists. If the position feels tight, do the bar set twice. Don’t fix it under 85 %.
Squatting after something else. If you deadlifted or did leg presses first, the hips are already warm. Start at the 50 % set and keep the rest.
Heavy squat cues
The 85 % single is where you check the cues you’ll need on the work sets:
- Brace before you unrack. Breathe into the belly, lock it, then stand the bar up.
- Walk out short. Two or three steps. Long walkouts burn energy you need for the set.
- Same depth every rep. Hip crease below the top of the knee is the competition standard. Pick your depth and rehearse it from the bar set onwards.
- Knees track the toes. Let them go forward as needed. Don’t let them cave on the way up.
Safety
- Set the safeties or pins on every set, not just the heavy ones. Set them during the bar set, just below the bar at your bottom position.
- Squat in a rack, not free-standing, when you train alone.
- Collars on once you’re past the 50 % set. Plates slide on an uneven grind.
- If the 85 % single moves slowly when it normally doesn’t, lower today’s work sets. Write down why.
Limits
Front squats, box squats and paused squats use the same ramp on a 20 kg bar. A safety squat bar usually weighs more than 20 kg and varies by brand: weigh it, or treat the bar as 0 and track plates only. The LiftLoggr app does the second, since its catalog has no fixed weight for that bar: the safety-bar squat gets the two-step machine ramp, 50 % × 8 and 75 % × 4.
The calculator doesn’t plan a max-out day. For a true 1RM, take extra singles above 85 %.
In the app
In LiftLoggr, turn on Auto warm-up sets for your squat in the routine editor. Every workout then starts the squat with this ramp, built from that day’s first working set, with the plates shown under each set. Warm-ups don’t count toward your squat records.
Questions
How many warm-up sets should I do for squats?
Three or four: the empty bar, then about 50, 70 and 85 % of your first working set. A 100 kg working set gives 20 × 10, 50 × 5, 70 × 3, 85 × 1. Above about 180 kg some lifters add a fifth set between 70 and 85 %.
Should my squat warm-ups go to full depth?
Yes. The warm-ups are rehearsal. A half squat at 50 % teaches you nothing about the depth you need at 100 %, and your hips and knees need the full range before the heavy sets.
When should I put my belt on?
Most lifters put it on for the 70 % or 85 % set so the last warm-up feels like the work sets. Brace the same way with or without it.
Do I need warm-up sets if I already did a general warm-up?
Yes. A bike or mobility routine raises temperature, but only the squat itself rehearses the bar path, the brace and the depth at load. Studies on specific warm-ups found the lift-specific sets are what matter for performance.
What if my knees or hips feel stiff on the bar set?
Do a second bar set, or a set at 40 % for 5, before the 50 % set. Add sets at the bottom of the ramp, never extra reps at the top.
Sources
- Ribeiro et al. 2020, The role of specific warm-up during bench press and squat pubmed.ncbi.nlm.nih.gov
- IPF Technical Rules (squat depth standard) powerlifting.sport