Get the app (opens the App Store in a new tab)

Guides

Warm-up sets: how many, how heavy, how many reps

Do 2–4 warm-up sets before your first heavy lift: bar × 10, 50 % × 5, 70 % × 3, 85 % × 1. Ramps for squat and bench in kg and lb, plates per side.

Key takeaways

  1. 01First heavy lift of the day: 3–4 warm-up sets. Later lifts: 1–2. Light isolation work: 0–1.
  2. 02Ramp by percentage of the first working set: bar × 10, 50 % × 5, 70 % × 3, 85 % × 1.
  3. 03Reps drop as the weight climbs. Warm-ups should never tire you.
  4. 04Warm-up sets don't count as working sets or toward progression.
On this page

Do 3–4 warm-up sets before the first heavy lift of a session and 1–2 before later lifts. A simple ramp from the first working set: empty bar × 10, 50 % × 5, 70 % × 3 and 85 % × 1, then start your working sets.

Warm-up sets rehearse the movement at rising loads so the first working set isn’t the first heavy rep of the day. They are practice, not training: low reps, plenty left in the tank, and they never count toward progression.

Warm-up sets vs working sets

Warm-up set Working set
Purpose Groove the lift, raise temperature, check the bar path Drive progress
Load Bar up to about 85–90 % of the first working set The prescribed weight
Effort Far from failure Within 0–3 reps of failure
Counts toward weekly sets No Yes
Counts toward progression and PRs No Yes
Rest after 30–60 s; up to 2 min before the first working set Full rest

How many warm-up sets

Situation Warm-up sets Why
First compound lift, working weight ≥ 2× the bar 3–4 Big gap from bar to working weight
First compound lift, light working weight 1–2 Little gap to cover
Second lift, same muscles (e.g. incline after bench) 1–2 Already warm
Dumbbell or machine compound 2 50 % and 75 % is plenty
Isolation work (curls, raises, extensions) 0–1 Light loads; first working set warms you up
Heavy singles, doubles or a 1RM test 5–6 Smaller jumps near the top

Does it make you stronger on the day? The research is mixed but leans yes for the kind of warm-up lifters use. A systematic review of upper-body warm-ups found strong evidence that high-load dynamic warm-ups improve strength and power performance (McCrary et al. 2015). A broader meta-analysis found warm-ups improved performance in 79 % of the outcomes studied, with little evidence of harm (Fradkin et al. 2010). On the other hand, one crossover trial found that different warm-up types didn’t change the total reps done in 4 sets to failure at 80 % of 1RM (Ribeiro et al. 2014).

Read that as: warm-up sets help heavy, low-rep work most, and won’t add reps to high-rep sets. And the McCrary review found no trials at all on injury, so “warm up to avoid injury” is plausible but unproven. Do them for the first working set’s quality.

The ramp: percentages and reps

Step % of first working set Reps Skip it when
1 Empty bar 10 Working weight is the bar
2 50 % 5 50 % is at or below the bar
3 70 % 3 It isn’t heavier than step 2
4 85 % 1 Working weight is less than 2× the bar

Round every step to weights you can load, and drop any step that lands on the bar or reaches the working weight.

Squat and bench, kilograms (20 kg bar)

Working weight Bar × 10 50 % × 5 70 % × 3 85 % × 1
60 kg 20 kg 30 kg (5 / side) 42.5 kg (10 + 1.25 / side) 50 kg (15 / side)
100 kg 20 kg 50 kg (15 / side) 70 kg (25 / side) 85 kg (25 + 5 + 2.5 / side)
140 kg 20 kg 70 kg (25 / side) 97.5 kg (25 + 10 + 2.5 + 1.25 / side) 120 kg (25 + 25 / side)

Squat and bench, pounds (45 lb bar)

Working weight Bar × 10 50 % × 5 70 % × 3 85 % × 1
135 lb 45 lb 65 lb (10 / side) 95 lb (25 / side) 115 lb (35 / side)
225 lb 45 lb 110 lb (25 + 5 + 2.5 / side) 155 lb (45 + 10 / side) 190 lb (45 + 25 + 2.5 / side)

At 40 kg the ramp shortens to bar × 10, 27.5 kg × 3 and 35 kg × 1: 50 % would be the bar itself. At 30 kg there’s only the bar. For your own numbers and plate breakdowns, use the warm-up calculator and the plate calculator.

Edge cases by lift

  • Squat. The full ramp. Add a second bar-only set if your hips or ankles are stiff. Per-lift version: squat warm-up calculator.
  • Bench press. The full ramp. Use the 85 % single to set your arch and leg drive exactly as you will on working sets. See the bench press warm-up calculator.
  • Deadlift. The empty bar sits too low to pull from the floor with small plates. Start at 60 kg / 135 lb with full-size plates, then ramp. Deadlift warm-up calculator.
  • Overhead press. The gap from bar to working weight is small, so 2 sets often cover it. Overhead press warm-up calculator.
  • Dumbbells, machines, cables. Two steps: 50 % × 8 and 75 % × 4. For 30 kg dumbbells: 14 kg × 8, 22 kg × 4.
  • Bodyweight and bands. A few easy reps of the movement itself. No percentage ramp.
  • A 15 kg or 35 lb bar. Start from your bar, not 20 kg. Percentages stay the same.

Mistakes

  1. Too many reps near the top. 85 % × 5 is a working set. Keep heavy warm-ups to 1–3 reps.
  2. Jumping from the bar to the working weight. The first working set becomes the warm-up, and it’s the one you log.
  3. Warming up every exercise from scratch. After squats, leg press needs one feeler set, not four.
  4. Long rests between light sets. Keep moving. Save the long rest for the working sets: see rest between sets.
  5. Counting warm-ups as volume. They’re not hard sets. Keep them out of your weekly set count.

How LiftLoggr builds warm-up sets

LiftLoggr builds the ramp from your first working set’s weight, using your own bar and plates (Settings → Bar & plates).

  • Barbell lifts: empty bar × 10, 50 % × 5, 70 % × 3, and 85 % × 1 when the working weight is at least twice the bar. Each step snaps to the nearest weight your plates can make. Steps that land on the bar or reach the working weight are dropped.
  • Dumbbells, kettlebells, machines and cables: 50 % × 8 and 75 % × 4, rounded to the equipment’s step.
  • Bodyweight and band exercises: no ramp.
  • Two ways to add them. Turn on “Auto warm-up sets” for an exercise in the routine editor and every session starts with the ramp in place. Or tap the exercise’s menu and choose “Add warm-up sets” for one session.
  • Warm-ups stay out of progression. They copy last time’s warm-ups; they never trigger a weight jump, a deload suggestion or a personal record, and they don’t ask for reps in reserve.
  • Totals are your call. Settings → Units & totals → “Warm-up sets count in totals” decides whether they add to session volume.

Each barbell set also shows its plates per side under the weight, so you load the bar without doing arithmetic. The rest timer starts after warm-up sets too; skip it or let it run short.

Questions

How many warm-up sets should I do?

3–4 before the first heavy compound lift of the session, 1–2 before the next lifts that use the same muscles, and 0–1 before light isolation work. Heavier working sets need more steps; a working weight close to the empty bar needs none.

Do warm-up sets count as working sets?

No. Warm-ups are too far from failure to count toward weekly sets or progression. Count only sets that end within a few reps of failure.

How many reps should a warm-up set be?

Fewer as the weight climbs: about 10 with the empty bar, 5 at 50 %, 3 at 70 % and 1 at 85 % of the working weight. The last sets are practice, not work.

Should you rest between warm-up sets?

Briefly. 30–60 seconds after the light sets is enough; take 1–2 minutes after the last, heaviest warm-up before the first working set.

Do I need warm-up sets for every exercise?

No. Once a muscle group is warm from an earlier lift, one feeler set at about 60 % is enough. Isolation and machine work at moderate weight usually needs none.

Sources

  1. McCrary et al. 2015, Effects of upper body warm-up on performance and injury: systematic review (Br J Sports Med) pubmed.ncbi.nlm.nih.gov
  2. Fradkin et al. 2010, Effects of warming-up on physical performance: systematic review with meta-analysis (J Strength Cond Res) pubmed.ncbi.nlm.nih.gov
  3. Ribeiro et al. 2014, Effect of different warm-up procedures on resistance training performance (Percept Mot Skills) pubmed.ncbi.nlm.nih.gov