Key takeaways
- 01Training max = 85–90% of your one-rep max. Every percentage comes from it.
- 02Week 1: 65/75/85% × 5. Week 2: 70/80/90% × 3. Week 3: 75/85/95% × 5/3/1. Week 4: deload.
- 03The last set of weeks 1–3 is a plus set: as many good reps as you can.
- 04After each cycle, add 2.5 kg (5 lb) to press and bench, 5 kg (10 lb) to squat and deadlift.
On this page
- Days per week
- 4
- Level
- Intermediate
- Length
- 4 weeks
- Equipment
- Barbell, rack, bench, plates, pull-up bar, dip station, dumbbells, cable station, leg curl machine, ab wheel
A .liftloggr.json routine file. Open it on your iPhone and choose LiftLoggr to import every day of the plan.
The schedule
Day 1 Press
| Exercise | Sets | Reps | RIR | Notes |
|---|---|---|---|---|
| Barbell Overhead Press (Strict) | 3 | 5 | – | 5/3/1 sets: weights from the training max; last set is the plus set |
| Chin-Up (Underhand Grip) | 3 | 6-10 | 2 | |
| Dip (Triceps Focus) | 3 | 8-12 | 2 | |
| Face Pull | 3 | 12-20 | 1 |
Day 2 Deadlift
| Exercise | Sets | Reps | RIR | Notes |
|---|---|---|---|---|
| Conventional Deadlift | 3 | 5 | – | 5/3/1 sets: weights from the training max; last set is the plus set |
| Bulgarian Split Squat | 3 | 8-12 | 2 | Reps per leg |
| Hanging Knee Raise | 3 | 10-15 | 1 |
Day 3 Bench
| Exercise | Sets | Reps | RIR | Notes |
|---|---|---|---|---|
| Barbell Bench Press | 3 | 5 | – | 5/3/1 sets: weights from the training max; last set is the plus set |
| Dumbbell Single Arm Row | 3 | 8-12 | 2 | Reps per arm |
| Barbell Skullcrusher (Lying Triceps Extension) | 3 | 8-12 | 1 | |
| Dumbbell Lateral Raise | 3 | 12-20 | 1 |
Day 4 Squat
| Exercise | Sets | Reps | RIR | Notes |
|---|---|---|---|---|
| Barbell Back Squat (High Bar) | 3 | 5 | – | 5/3/1 sets: weights from the training max; last set is the plus set |
| Lying Leg Curl | 3 | 10-15 | 1 | |
| Lat Pulldown (Wide Grip) | 3 | 10-15 | 1 | |
| Ab Wheel Rollout | 3 | 8-12 | 2 |
Progression
Main lifts run off a training max (TM) of 85–90% of your one-rep max. Weeks 1–3 use fixed percentages of the TM; the last set is a plus set for as many good reps as you can. After each 4-week cycle, add 2.5 kg (5 lb) to the press and bench TM and 5 kg (10 lb) to the squat and deadlift TM. If you miss the minimum reps on a plus set, cut that TM by about 10%. Assistance lifts use double progression in their rep ranges.
Deload
Week 4 of every cycle is a deload: 3 sets of 5 at 40%, 50% and 60% of the training max, with light or no assistance. Then start the next cycle with the raised training max.
5/3/1 is Jim Wendler’s strength program built on four lifts (squat, bench press, deadlift and overhead press), each trained once a week in 4-week cycles. Every working weight is a percentage of a training max set at 85–90% of your one-rep max, and the training max goes up by 2.5–5 kg after every cycle.
This page explains the system in our own words and gives a 4-day template you can import. For the full method, its many variants and Wendler’s reasoning, read his books at jimwendler.com. To get your numbers for every week, use the 5/3/1 calculator.
The training max
Everything in 5/3/1 is calculated from a training max (TM), not your true max. Set it at 85–90% of your one-rep max. Wendler’s earlier books used 90%; his own online training max calculator defaults to 85%, labelled as recommended for most lifters.
Starting light is the point. A TM below your max means every working set is a weight you can move with good form, the plus sets leave room for rep PRs, and the program runs for months before it stalls.
No recent max? Take a recent set of 3–5 good reps, estimate your one-rep max with the 1RM calculator, and multiply by 0.85.
The four-week cycle
Each main lift gets three working sets per session. The percentages change every week:
| Week | Set 1 | Set 2 | Set 3 (plus set) |
|---|---|---|---|
| 1 (“5s week”) | 65% × 5 | 75% × 5 | 85% × 5+ |
| 2 (“3s week”) | 70% × 3 | 80% × 3 | 90% × 3+ |
| 3 (“5/3/1 week”) | 75% × 5 | 85% × 3 | 95% × 1+ |
| 4 (deload) | 40% × 5 | 50% × 5 | 60% × 5 |
All percentages are of the training max. “5+” means at least 5 reps, then as many more good reps as you can. Stop when the next rep would be a grind or your form would break.
Warm-up. Before the working sets, ramp up with something like 40%, 50% and 60% of the TM for 5, 5 and 3 reps. The warm-up calculator works too.
A worked four-week example
Squat, estimated one-rep max 141 kg, so the training max is 141 × 0.85 = 120 kg (rounded). Weights rounded to the nearest 2.5 kg.
| Week | Set 1 | Set 2 | Set 3 | Plus-set result |
|---|---|---|---|---|
| 1 | 77.5 kg × 5 | 90.0 kg × 5 | 102.5 kg × 5+ | 9 reps |
| 2 | 85.0 kg × 3 | 95.0 kg × 3 | 107.5 kg × 3+ | 6 reps |
| 3 | 90.0 kg × 5 | 102.5 kg × 3 | 115.0 kg × 1+ | 4 reps |
| 4 | 47.5 kg × 5 | 60.0 kg × 5 | 72.5 kg × 5 | Deload, no plus set |
Every plus set beat its minimum, so the next cycle runs with a squat TM of 125 kg. The week 3 plus set (115 kg × 4) works out to an estimated one-rep max of about 125 kg on the Brzycki formula. Track those estimates across cycles: that’s your real progress line, more than the TM itself.
The 5/3/1 calculator prints all four weeks for all four lifts from your maxes. The plate calculator turns each weight into plates per side.
Progression between cycles
After week 4:
| Lift | Add to the training max |
|---|---|
| Overhead press | 2.5 kg (5 lb) |
| Bench press | 2.5 kg (5 lb) |
| Squat | 5 kg (10 lb) |
| Deadlift | 5 kg (10 lb) |
That is 10 kg on the squat and 5 kg on the bench every two months: slow on paper, steady in practice. The ACSM position stand recommends periodized loading with an emphasis on heavy sets for intermediate and advanced lifters; 5/3/1 does that in its simplest form.
When a plus set fails. If you can’t get the minimum reps (5 in week 1, 3 in week 2, 1 in week 3), the TM has outrun you. Cut that lift’s TM by about 10% and build back. Don’t cut the other lifts.
Assistance and supplemental work
The main sets take 15 minutes. The rest of the session is assistance work. Keep it simple: some pushing, some pulling and some single-leg or core work each session, never so much that it eats into the main lifts. In this template:
| Day | Main lift | Assistance |
|---|---|---|
| 1 | Overhead press | Chin-ups, dips, face pulls |
| 2 | Deadlift | Bulgarian split squats, hanging knee raises |
| 3 | Bench press | One-arm dumbbell rows, skullcrushers, lateral raises |
| 4 | Squat | Lying leg curls, lat pulldowns, ab wheel rollouts |
Assistance lifts use rep ranges and double progression: add weight when every set reaches the top of the range.
Supplemental volume (optional). For more size, add 5 sets of the main lift after the 5/3/1 sets. Two common choices from Wendler’s books: “Boring But Big,” 5 × 10 at 50–60% of the TM, and “First Set Last,” 3–5 sets of 5 at the first working set’s weight. Start conservatively: Boring But Big at 50% is a lot of work.
Weekly volume per muscle
Direct working sets per week in the template above, without supplemental work. With Boring But Big, add 5 sets to each main lift’s muscles.
| Muscle | Direct sets / week | From |
|---|---|---|
| Quads | 6 | Squat, split squat |
| Hamstrings and glutes | 6 | Deadlift, leg curl (plus squat and split squat) |
| Chest | 6 | Bench, dips |
| Back | 9 | Chin-up, dumbbell row, pulldown (plus deadlift) |
| Shoulders | 9 | Press, face pull, lateral raise |
| Triceps | 6 | Dips, skullcrusher (plus both presses) |
| Biceps | 3 | Chin-up (plus rows and pulldowns) |
| Abs | 6 | Knee raise, rollout |
That is lean for size, which is why many lifters add supplemental work. Plug in your own version with the weekly volume calculator.
Deload rule
Week 4 is the deload: 40%, 50% and 60% of the TM for 5 reps, with assistance cut back or skipped. Don’t skip it because you feel fine. A 2023 Delphi consensus of strength and physique coaches describes a deload as a period of reduced training stress to manage fatigue and prepare for the next block. That is exactly what week 4 does before the TM rises. Wendler’s later books schedule deloads differently for some templates; whichever version you run, deload on a schedule, not on a bad day. More in the deload week guide.
Substitutions
5/3/1 is built around the four barbell lifts, so swap assistance work freely but keep the main lifts if you can. If a main lift is off the table, swap it for a close barbell variation and set a new TM for it.
| Main lift | Close substitute | Guide |
|---|---|---|
| Squat | Safety bar squat, front squat | Squat alternatives |
| Bench press | Close-grip bench, incline barbell bench | Bench press alternatives |
| Deadlift | Trap bar deadlift, sumo deadlift | Deadlift alternatives |
| Overhead press | Push press, seated barbell press | Overhead press alternatives |
| Chin-ups | Lat pulldown, assisted pull-up | Pull-up alternatives |
Common mistakes
- Using your true max as the training max. The plus sets turn into grinders by cycle 2.
- Maxing out every plus set. Many good reps, not one ugly one. A 2024 meta-regression (Robinson et al.) found strength gains were similar across a wide range of proximity to failure.
- Raising the TM by more than the program says. A great cycle doesn’t earn a double jump.
- Assistance that outgrows the main work. If your squat plus sets drop because of 20 sets of leg accessories, cut the accessories.
- Skipping week 4.
- Losing track of rep PRs. The plus sets are the progress measure. Log every one.
5/3/1 vs other programs
| 5/3/1 | GZCLP | 5x5 | |
|---|---|---|---|
| Weight goes up | Every 4 weeks | Every session | Every session |
| Best for | Intermediates | Late beginners | Beginners |
| Load set by | % of training max | Last session + stages | Last session |
Compare all eight programs on the programs page.
Run it in LiftLoggr
Download the routine file below (531.liftloggr.json). On your iPhone, open it from Safari’s downloads or the Files app, tap Share and choose LiftLoggr. Or in the app: Settings → Data → Import workout templates → Open JSON file.
LiftLoggr previews the file and imports nothing until you tap Import. You get four routines (Press, Deadlift, Bench, Squat) with the main lift, its assistance, sets, rep targets and notes. Importing the same file twice doesn’t duplicate them.
Be clear about what the app does and doesn’t do with 5/3/1:
- LiftLoggr doesn’t calculate percentages. Get each week’s weights from the 5/3/1 calculator and type them into the main-lift sets. Change the reps to 3 in week 2 and to 5, 3, 1 in week 3.
- Pre-fill copies last time. The main lift’s sets pre-fill with last week’s weights and reps; overwrite them with this week’s numbers. Last time’s sets stay visible beside each set, which makes plus-set PRs easy to chase.
- No automatic weight jumps on the main lifts. Fixed-rep and plus-set work isn’t auto-progressed. The training max is yours to raise.
- Assistance lifts do progress. They have rep ranges, so LiftLoggr pre-fills one step heavier once every set reached the top of the range.
- Estimated 1RM. Plus sets of up to 12 reps feed the app’s estimated one-rep max for each lift, so you can watch the trend across cycles.
To add Boring But Big, add 5 sets of 10 to the main lift in the session or in the routine editor.
Questions
What training max should I use for 5/3/1?
85–90% of your one-rep max. Wendler's original books used 90%; his later material and his own training max calculator default to 85%, which most lifters find easier to progress on. If you don't know your max, estimate it from a recent set of 3–5 reps.
Is 5/3/1 good for beginners?
It works, but it is slow for a true beginner: the training max only rises once a month. Most lifters do better running a session-to-session linear program like 5x5 or GZCLP first, then moving to 5/3/1 when they stall.
What happens if I miss the reps on a plus set?
If you can't get the minimum reps (5, 3 or 1) on the last set, your training max is too heavy. Drop it by about 10% and work back up.
What is Boring But Big?
One of Wendler's supplemental templates: after the main 5/3/1 sets, 5 sets of 10 reps of the same lift at 50–60% of the training max. It adds a lot of volume; start at 50%.
How many days a week is 5/3/1?
The classic layout is 4 days, one main lift per day. On 3 days a week, rotate the four lifts in order, so each one comes round every 9–10 days; the cycle then takes longer than 4 calendar weeks.
Sources
- Jim Wendler, official site and 5/3/1 books jimwendler.com
- Jim Wendler, 5/3/1 training max calculator jimwendler.com
- ACSM 2009 position stand, progression models in resistance training pubmed.ncbi.nlm.nih.gov
- Robinson et al. 2024, proximity to failure, strength and hypertrophy (Sports Med) pubmed.ncbi.nlm.nih.gov
- Bell et al. 2023, deloading Delphi consensus (Sports Med Open) pubmed.ncbi.nlm.nih.gov