Get the app (opens the App Store in a new tab)

Programs

5x5 program: the classic linear progression for beginners

Five sets of five, five lifts, three days a week. Add weight every session until you can't.

Key takeaways

  1. 01Workout A: squat, bench press, barbell row. Workout B: squat, overhead press, deadlift.
  2. 025 sets of 5 on everything except the deadlift (1 set of 5).
  3. 03Add 2.5 kg (5 lb) every session; 5 kg (10 lb) on the deadlift.
  4. 04Miss reps three sessions running: drop 10% and climb again.
On this page
Days per week
3
Level
Beginner
Length
12 weeks
Equipment
Barbell, squat rack, flat bench, plates
Download for LiftLoggr

A .liftloggr.json routine file. Open it on your iPhone and choose LiftLoggr to import every day of the plan.

The schedule

Day 1 Workout A

ExerciseSetsRepsRIRNotes
Barbell Back Squat (High Bar)55–Same weight on all 5 sets
Barbell Bench Press55–
Barbell Bent Over Row55–Bar from the floor each rep is fine

Day 2 Workout B

ExerciseSetsRepsRIRNotes
Barbell Back Squat (High Bar)55–Same weight on all 5 sets
Barbell Overhead Press (Strict)55–
Conventional Deadlift15–One heavy set after warm-ups

Progression

Linear progression. Complete all 5 sets of 5 and add weight next session: 2.5 kg (5 lb) on squat, bench press, overhead press and barbell row, 5 kg (10 lb) on the deadlift. Miss reps and you repeat the weight next time. Miss at the same weight for three sessions in a row and you drop that lift about 10%, then progress again.

Deload

No scheduled deload: the 10% drop after three failed sessions is the deload, per lift. If two or more lifts reset in the same week, take 3 sessions at 3 × 5 with 10% less weight on everything, then resume.

A 5x5 program is five sets of five reps on a few barbell lifts, three days a week, adding weight every session. The common version alternates two workouts: A is squat, bench press and barbell row; B is squat, overhead press and one heavy set of deadlifts.

The 5×5 idea goes back to strength coach Bill Starr, whose 1976 book The Strongest Shall Survive built training around five sets of five on a few big lifts, with heavy, light and medium days. Many programs since use the A/B layout below, including StrongLifts 5×5. This page describes the generic template in our own words.

The weekly schedule

Week Mon Wed Fri
1, 3, 5, … A B A
2, 4, 6, … B A B
Workout Lift 1 Lift 2 Lift 3
A Squat 5 × 5 Bench press 5 × 5 Barbell row 5 × 5
B Squat 5 × 5 Overhead press 5 × 5 Deadlift 1 × 5

You squat every session. Bench and overhead press alternate, as do rows and deadlifts. Any three non-consecutive days work.

Sets across. All five sets use the same weight, after warm-ups. “5 × 5 at 80 kg” means five sets of five at 80 kg.

Rest. 2–3 minutes early on, 3–5 minutes once the weights get heavy. Long rests aren’t wasted time: Schoenfeld et al. (2016) found 3-minute rests produced more strength than 1-minute rests.

Session length. About 45 minutes in the first weeks, 60–75 minutes once you need longer rests and more warm-up sets.

Starting weights

Start light: the program adds weight fast, and the first weeks are for technique.

Lift Start at
Squat Empty bar, 20 kg (45 lb), or about 50% of your 5-rep max
Bench press Empty bar or about 50% of your 5-rep max
Overhead press Empty bar or about 50% of your 5-rep max
Barbell row 30–40 kg (65–85 lb), enough plates to start from the floor
Deadlift 40–60 kg (95–135 lb)

If the empty bar is too heavy for the overhead press, use lighter fixed barbells or dumbbells for a few weeks. Load the bar quickly with the plate calculator.

Load and progression

  1. Complete all 5 sets of 5 at a weight.
  2. Next session, add weight: 2.5 kg (5 lb) on squat, bench, overhead press and row; 5 kg (10 lb) on the deadlift.
  3. Miss a rep anywhere: repeat the weight next session.
  4. Miss at the same weight three sessions in a row: drop that lift by about 10% and climb again.

This is the simplest form of progressive overload, and it works because beginners recover from one session to the next. The ACSM position stand notes that novices respond to a wide range of loads; Rhea et al.’s 2003 meta-analysis found untrained lifters gained strength best with moderate loads and each muscle trained about 3 days a week. Squatting every session at moderate-to-heavy weights fits that.

A worked four-week example

Starting at squat 60 kg, bench 40 kg, row 40 kg, overhead press 30 kg, deadlift 70 kg, with every session successful:

Week Day Workout Squat Bench or press Row or deadlift
1 Mon A 60.0 kg Bench 40.0 kg Row 40.0 kg
1 Wed B 62.5 kg Press 30.0 kg Deadlift 70 kg
1 Fri A 65.0 kg Bench 42.5 kg Row 42.5 kg
2 Mon B 67.5 kg Press 32.5 kg Deadlift 75 kg
2 Wed A 70.0 kg Bench 45.0 kg Row 45.0 kg
2 Fri B 72.5 kg Press 35.0 kg Deadlift 80 kg
3 Mon A 75.0 kg Bench 47.5 kg Row 47.5 kg
3 Wed B 77.5 kg Press 37.5 kg Deadlift 85 kg
3 Fri A 80.0 kg Bench 50.0 kg Row 50.0 kg
4 Mon B 82.5 kg Press 40.0 kg Deadlift 90 kg
4 Wed A 85.0 kg Bench 52.5 kg Row 52.5 kg
4 Fri B 87.5 kg Press 42.5 kg Deadlift 95 kg

That’s 27.5 kg on the squat in four weeks. It won’t last forever: within a few months the jumps get hard. The overhead press usually stalls first, because 2.5 kg is a big share of a light press. When it does, use 1 kg plates if your gym has them, or add 2.5 kg every other session.

When a lift stalls. Say the bench fails at 60 kg on three sessions in a row (5, 5, 5, 4, 3 each time). Next session: 54 kg, about 10% less, rounded to 55 kg. Climb again by 2.5 kg a session. Most lifters pass their old stall point within three weeks.

Warm-ups. Before each lift’s work sets: two sets with the empty bar, then 3–4 sets climbing to the working weight with fewer reps each time. The warm-up calculator builds them for you.

Weekly volume per muscle

Muscle Direct sets / week From
Quads, glutes 15 Squat every session
Hamstrings, lower back 1–2 (plus every squat) Deadlift, every other session
Chest 5–10 Bench, 1–2 sessions a week
Shoulders 5–10 Overhead press, 1–2 sessions a week
Upper back 5–10 Rows, 1–2 sessions a week
Arms 0 direct Every press and row

Legs get a lot; arms get nothing direct. That’s the trade-off of a strength-first program. If you want more upper-body growth, add chin-ups (3 sets) and dips (3 sets) at the end of each session once the squat stops feeling easy. Check the totals with the weekly volume calculator.

Deload rule

5x5 deloads by lift, not by calendar: three failed sessions at one weight means a 10% drop on that lift only. If two or more lifts reset in the same week, or every session feels like a fight, take three sessions at 3 × 5 with 10% less on everything, then resume. After the second reset on the same lift, the program has done its job for that lift; see “What next” below. The deload week guide covers when a full week off heavy work makes sense.

Substitutions

5x5 depends on small, steady barbell jumps, so keep the five lifts if you can. If a lift hurts or isn’t possible:

Lift Substitute Guide
Back squat Front squat, safety bar squat Squat alternatives
Bench press Close-grip bench, dumbbell bench Bench press alternatives
Overhead press Seated barbell press, dumbbell press Overhead press alternatives
Deadlift Trap bar deadlift Deadlift alternatives
Barbell row Pendlay row, chest-supported row Barbell row alternatives

Common mistakes

  • Starting heavy. The first weeks are the cheapest progress you’ll ever get. Don’t skip them.
  • Adding weight after a failed session. All 25 reps first.
  • Short rests on heavy days. 90 seconds before your fourth set of squats costs reps.
  • Five sets of deadlifts. One heavy set after squatting is plenty.
  • Resetting every lift when one stalls. Reset only the lift that failed.
  • Running it for a year. When resets stop working, change programs.

What next

Situation Next program
Two resets on most lifts GZCLP: stages stretch the linear progression
Stalled, and weekly jumps feel too fast 5/3/1: monthly progression from a training max
You want more size than strength Upper/lower or PHUL

Compare all eight on the programs page.

Run it in LiftLoggr

Download the routine file below (5x5.liftloggr.json). On your iPhone, open it from Safari’s downloads or the Files app, tap Share and choose LiftLoggr. Or in the app: Settings → Data → Import workout templates → Open JSON file.

LiftLoggr previews the file and imports nothing until you tap Import. You get two routines, Workout A and Workout B, with the sets, reps and notes. Importing the same file twice doesn’t duplicate them. Leave weekdays off and Home alternates A and B for you.

  • First session: the file carries no weights. Enter your starting weights.
  • After that: each set pre-fills from last time, with last time’s weight and reps beside it. The squat pre-fills from whichever workout you did last, since it’s the same exercise on both days.
  • You add the 2.5 kg. LiftLoggr’s automatic weight steps work on rep ranges; fixed 5 × 5 work pre-fills last time’s weight, and you add the jump yourself. Last time’s numbers beside each set make the rule easy: all fives, add weight.
  • Warm-ups: open a routine, choose an exercise and switch on Auto warm-up sets to have LiftLoggr build the ramp from your first working set.
  • Estimated 1RM: sets of five feed each lift’s estimated one-rep max, so you can watch strength climb even when the weight stalls.

Questions

Is 5x5 good for beginners?

Yes, it is one of the simplest ways to get strong in your first months of lifting: five barbell lifts, one rep scheme and weight added every session. Learn the lifts with light weights first; the program ramps up quickly.

How long can I run a 5x5 program?

Usually 3–6 months, until the weekly jumps stop working even after a reset. At that point, move to a program with slower progression and more variety, such as GZCLP or 5/3/1.

Does 5x5 build muscle?

Yes, especially for beginners. But it is strength-first: there is no arm, shoulder-isolation or calf work. Add 2–3 sets of chin-ups, dips or curls after the main lifts if size matters to you.

Is 5x5 the same as StrongLifts?

StrongLifts 5x5 is one well-known named program using this A/B layout. This page describes the generic 5x5 template, which goes back to Bill Starr's 1976 book The Strongest Shall Survive.

What if I can't add 2.5 kg every session?

On the overhead press and bench, smaller jumps help: 1 kg (2.5 lb) with fractional plates, or 2.5 kg every other session. When you miss reps three sessions running at one weight, drop 10% and rebuild.

Sources

  1. USA Strength and Conditioning Coaches Hall of Fame, Bill Starr usastrengthcoacheshf.com
  2. ACSM 2009 position stand, progression models in resistance training pubmed.ncbi.nlm.nih.gov
  3. Rhea et al. 2003, dose response for strength development (Med Sci Sports Exerc) pubmed.ncbi.nlm.nih.gov
  4. Schoenfeld et al. 2016, longer rest periods and strength and hypertrophy (J Strength Cond Res) pubmed.ncbi.nlm.nih.gov