Get the app (opens the App Store in a new tab)

Programs

PHUL workout: power and hypertrophy, upper and lower

Four days. Two heavy days for strength, two higher-rep days for size. Same muscles, twice a week, two different jobs.

Key takeaways

  1. 01Mon Upper Power, Tue Lower Power, Thu Upper Hypertrophy, Fri Lower Hypertrophy.
  2. 02Power days: main lifts at 3–5 reps. Hypertrophy days: 8–12 reps.
  3. 03Every exercise has a rep range: add weight when all sets reach the top.
  4. 04Power days run 60–75 minutes. Plan for it.
On this page
Days per week
4
Level
Intermediate
Length
8 weeks
Equipment
Barbell, rack, bench (flat and incline), plates, dumbbells, cable station, lat pulldown, leg press, leg extension, leg curl and calf machines
Download for LiftLoggr

A .liftloggr.json routine file. Open it on your iPhone and choose LiftLoggr to import every day of the plan.

The schedule

Day 1 Upper Power

ExerciseSetsRepsRIR
Barbell Bench Press33-52
Barbell Bent Over Row33-52
Incline Dumbbell Bench Press36-102
Lat Pulldown (Wide Grip)36-102
Barbell Overhead Press (Strict)25-82
Barbell Curl26-101
Barbell Skullcrusher (Lying Triceps Extension)26-101

Day 2 Lower Power

ExerciseSetsRepsRIR
Barbell Back Squat (High Bar)33-52
Conventional Deadlift33-52
Leg Press310-152
Lying Leg Curl36-101
Seated Calf Raise46-101

Day 3 Upper Hypertrophy

ExerciseSetsRepsRIRNotes
Incline Barbell Bench Press38-122
Dumbbell Fly38-121
Seated Cable Row (Close Grip)38-122
Dumbbell Single Arm Row38-122Reps per arm
Dumbbell Lateral Raise38-121
Incline Dumbbell Curl38-121
Cable Triceps Pushdown (Rope)38-121

Day 4 Lower Hypertrophy

ExerciseSetsRepsRIRNotes
Barbell Front Squat38-122
Barbell Lunge38-122Reps per leg
Leg Extension310-151
Seated Leg Curl310-151
Standing Calf Raise38-121

Progression

Double progression on every exercise, with the rep range set by the day. Keep the weight until all working sets reach the top of the range (5 on power main lifts, 12 or 15 on hypertrophy work), then add one step: 2.5 kg (5 lb) on upper-body barbell lifts and machines, 2.5–5 kg (5–10 lb) on squats and deadlifts, the next dumbbell on dumbbell lifts.

Deload

After 7 weeks, deload for one week: same exercises, half the sets, about 10% lighter, 3–4 reps in reserve, nothing heavier than 5 reps. Deload early if power-day lifts miss 3 reps for three sessions running.

PHUL (Power Hypertrophy Upper Lower) is a 4-day program with two heavy “power” days at 3–5 reps on the main lifts and two “hypertrophy” days at 8–12 reps, split into upper and lower sessions. It was created by Brandon Campbell and published on Muscle & Strength; it trains every muscle twice a week, once heavy and once for volume.

This page describes a PHUL-style template in our own words: the structure, a full schedule you can import, the progression rule, weekly volume and the common mistakes. For Campbell’s original write-up, see Muscle & Strength.

The weekly schedule

Day Session Main rep range Typical length
Mon Upper Power 3–5 on the first two lifts, 6–10 after 60–75 min
Tue Lower Power 3–5 on squat and deadlift 60–75 min
Wed Rest — —
Thu Upper Hypertrophy 8–12 50–65 min
Fri Lower Hypertrophy 8–15 50–65 min
Sat Rest — —
Sun Rest — —

Power first, hypertrophy second: you start the week fresh for the heaviest lifting. Monday/Tuesday/Thursday/Friday is the standard layout. Keep the order if you move days.

Power days

Each power day starts with two compounds for 3 sets of 3–5 reps, resting 3–5 minutes. Then come secondary compounds at 6–10 reps and a few accessories. The heavy sets build strength on the bench, row, squat and deadlift; the 6–10 work keeps enough volume on the day to grow.

Long rest is part of the program. Schoenfeld et al. (2016) found 3-minute rests produced more strength and muscle than 1-minute rests in trained men. Use them.

Effort. Stop heavy sets with about 2 reps in reserve. A set of 5 that could have been 7 is perfect; a grinding fifth rep means the weight is too heavy for the range. See RIR vs RPE.

Hypertrophy days

Hypertrophy days swap the heavy barbell work for different exercises at 8–12 reps (10–15 on leg extensions and leg curls) with 1–2 minutes rest. Different exercises from the power days, on purpose: incline bench and flyes instead of flat bench, front squats and lunges instead of back squats and deadlifts. More angles, less joint stress from the same movement twice a week.

Take isolation sets to about 1 rep in reserve. They recover fast.

Load and progression

Every exercise in this template has a rep range, so it runs on double progression:

  1. Start at a weight you can lift for the bottom of the range with 2 reps in reserve.
  2. Add reps session to session at that weight.
  3. When all working sets reach the top of the range, add weight: 2.5 kg (5 lb) on upper-body barbell lifts and machines, 2.5–5 kg (5–10 lb) on squats and deadlifts, the next dumbbell on dumbbell work.
  4. Climb again.

The ACSM position stand recommends exactly this mix for intermediates: a wide loading range from heavy to moderate, with the load raised 2–10% once you beat the target by a rep or two.

A worked four-week example

Barbell squat on Lower Power, 3 × 3–5, starting at 110 kg:

Week Weight Set 1 Set 2 Set 3 Decision
1 110.0 kg 5 4 4 Stay
2 110.0 kg 5 5 5 All at the top: add 5 kg
3 115.0 kg 4 4 3 Stay
4 115.0 kg 5 4 4 Stay

A 3–5 range is narrow, so each jump is a big share of it. If you stall at 3 reps for three sessions, use 2.5 kg jumps on that lift. Front squats on Friday progress separately, in their own 8–12 range. More on the method in double progression.

Warm-ups. Heavy triples and fives need a proper ramp: 4–5 warm-up sets climbing to about 85% of the working weight. The warm-up calculator builds them.

Starting weights

Week 1 is for calibration. On power days, start the main lifts at roughly your 8-rep weight: a load you could lift 8 times will feel right for sets of 5 with 2–3 in reserve. If you know your one-rep max, that is about 75–80% of it; the 1RM calculator estimates it from any recent set.

On hypertrophy days, pick weights you can lift for 10 with 2 left. Write everything down, including the reps you could have done. By week 2, double progression takes over and the log decides every weight.

Coming from a straight upper/lower split? Your 6–10 rep weights on the same lifts are a good starting point for the 6–10 work on power days.

Weekly volume per muscle

Muscle Heavy sets (3–5 / 5–8) Moderate sets (6–15) Total direct sets
Chest 3 9 12
Back 3 9 12 (plus deadlifts)
Shoulders 2 3 5 (plus all presses)
Biceps — 5 5 (plus all rows)
Triceps — 5 5 (plus all presses)
Quads 3 12 15
Hamstrings and glutes 3 6 9 (plus squats and lunges)
Calves — 7 7

Chest counts the bench, incline dumbbell press, incline barbell press and flyes; back counts the barbell row, pulldown, cable row and one-arm row. That puts chest, back and quads at 12–15 direct sets a week. Schoenfeld’s 2017 meta-analysis found more weekly sets produced more growth, with a trend favouring 10 or more sets per muscle; arms and side delts sit lower here. If arms are a priority, add a set to each arm exercise. Run your own numbers through the weekly volume calculator, or read sets per muscle per week.

Deload rule

After 7 weeks, take a deload week: same exercises, half the sets, about 10% lighter, 3–4 reps in reserve, and nothing heavier than 5 reps. A 2023 Delphi consensus of strength and physique coaches describes deloading as a planned reduction in training stress to manage fatigue and prepare for the next block.

Deload early if power-day lifts can’t hit 3 reps for three sessions in a row at the same weight, or if heavy days start to feel heavy before you’ve loaded the bar. More in the deload week guide.

Substitutions

Planned Swap for Guide
Barbell bench press Dumbbell bench press Bench press alternatives
Barbell row Pendlay row, chest-supported row Barbell row alternatives
Back squat or front squat Safety bar squat, hack squat Squat alternatives
Deadlift Trap bar deadlift, rack pull Deadlift alternatives
Overhead press Seated dumbbell press Overhead press alternatives
Lat pulldown Pull-up, weighted pull-up Pull-up alternatives

On power days, swap barbell for barbell where you can: heavy 3–5 rep work suits lifts that load well and progress in small steps.

Common mistakes

  • Treating power days as max-out days. Sets of 3–5 with 2 in reserve. No grinders.
  • Short rests on heavy sets. Three minutes minimum on the first two lifts.
  • Hypertrophy days done heavy. Fewer reps at more weight turns four days into four power days.
  • Squats and deadlifts both to the limit on Tuesday. If the deadlift suffers, take 2 reps in reserve on squats and 3 on deadlifts.
  • Running it as a first program. Learn the lifts on a simpler plan first; see the beginner gym workout plan.

PHUL vs other 4-day programs

PHUL Upper/lower 5/3/1
Heaviest work 3–5 reps, 2 days 6–10 reps 1–5 reps by percentage
Session length 50–75 min 55–65 min 45–60 min
Best for Strength and size equally Size first Strength first
Progression Double progression Double progression Training max per cycle

The programs page compares all eight.

Run it in LiftLoggr

Download the routine file below (phul.liftloggr.json). On your iPhone, open it from Safari’s downloads or the Files app, tap Share and choose LiftLoggr. Or in the app: Settings → Data → Import workout templates → Open JSON file.

LiftLoggr previews the file and imports nothing until you tap Import. You get four routines, Upper Power to Lower Hypertrophy, with sets, rep ranges, target RIR and notes. Importing the same file twice doesn’t duplicate them.

  • First session: the file carries no weights; enter yours.
  • After that: each set pre-fills from last time, with last time’s weight and reps beside it.
  • Progression: every exercise has a rep range, so when all working sets reach the top, LiftLoggr pre-fills the next session one step heavier, or two steps if every set was logged at RIR 3 or more.
  • Stalls: three sessions below the bottom of the range at the same weight bring up a deload suggestion of about 10%.

Pre-fills follow the exercise across routines, so the power and hypertrophy days in this template use different exercises wherever the rep ranges differ: lying leg curls heavy, seated leg curls light; seated calf raises on Tuesday, standing on Friday. If you swap exercises, keep that separation.

Questions

Is PHUL good for beginners?

Not as a first program. The power days need solid technique on the squat, deadlift and bench at 3–5 reps. Run a beginner plan or a simple upper/lower split for 3–6 months first.

PHUL vs PHAT?

PHAT (Layne Norton's Power Hypertrophy Adaptive Training) runs five days and splits the hypertrophy work by body part. PHUL fits the same idea into four days of upper and lower sessions, which is easier to recover from and to schedule.

PHUL vs a regular upper/lower split?

Same days, same muscles. PHUL makes the first two days of the week heavy (3–5 reps) and the last two lighter (8–12 reps); a standard upper/lower split keeps every day in the 6–12 range. Choose PHUL if strength on the big lifts matters to you as much as size.

Can I do PHUL with 3 days a week?

Not as written. It needs four sessions to cover two upper and two lower days. On three days, run a full-body plan instead.

How long are PHUL workouts?

Power days take 60–75 minutes because of the long rests on heavy sets. Hypertrophy days take 50–65 minutes.

Sources

  1. Boostcamp, PHUL 4-day split by Brandon Campbell (author attribution) boostcamp.app
  2. ACSM 2009 position stand, progression models in resistance training pubmed.ncbi.nlm.nih.gov
  3. Schoenfeld, Ogborn & Krieger 2016, training frequency and hypertrophy (Sports Med) pubmed.ncbi.nlm.nih.gov
  4. Schoenfeld, Ogborn & Krieger 2017, weekly sets and muscle growth (J Sports Sci) pubmed.ncbi.nlm.nih.gov
  5. Schoenfeld et al. 2016, longer rest periods and strength and hypertrophy (J Strength Cond Res) pubmed.ncbi.nlm.nih.gov
  6. Bell et al. 2023, deloading Delphi consensus (Sports Med Open) pubmed.ncbi.nlm.nih.gov