Get the app (opens the App Store in a new tab)

Programs

Full body workout, 3 days a week

Three sessions, three different days, the whole body each time. Under an hour, every major muscle trained two or three times a week.

Key takeaways

  1. 01Monday A, Wednesday B, Friday C: three different full-body sessions.
  2. 024–5 exercises a session, 3 sets each, 45–55 minutes.
  3. 03Every major muscle gets 2–3 sessions a week.
  4. 04Add 2.5 kg (5 lb) when all working sets reach the top of the range.
On this page
Days per week
3
Level
Beginner
Length
8 weeks
Equipment
Barbell, dumbbells, adjustable bench, cable station, lat pulldown, leg press and leg curl machine
Download for LiftLoggr

A .liftloggr.json routine file. Open it on your iPhone and choose LiftLoggr to import every day of the plan.

The schedule

Day 1 Full body A

ExerciseSetsRepsRIR
Barbell Back Squat (High Bar)36-102
Barbell Bench Press36-102
Barbell Bent Over Row38-122
Dumbbell Lateral Raise312-201

Day 2 Full body B

ExerciseSetsRepsRIR
Romanian Deadlift (RDL)38-122
Barbell Overhead Press (Strict)36-102
Lat Pulldown (Wide Grip)38-122
Lying Leg Curl310-151
Hammer Curl310-151

Day 3 Full body C

ExerciseSetsRepsRIR
Leg Press38-122
Incline Dumbbell Bench Press38-122
Seated Cable Row (Close Grip)38-122
Face Pull312-201
Cable Triceps Pushdown (Rope)310-151

Progression

Double progression. Keep each exercise's weight until all three working sets reach the top of the rep range with 1–2 reps in reserve, then add one step: 2.5 kg (5 lb) on barbell and machine lifts, the next dumbbell on dumbbell lifts. Climb the reps again from there.

Deload

After 7 weeks, deload for one week: same three sessions, 2 sets instead of 3, about 10% lighter, 3–4 reps in reserve. Deload early if a lift misses the bottom of its range three sessions running at the same weight. Return to your pre-deload weights after.

A full body workout 3 days a week trains legs, push and pull in every session, with a rest day between sessions. Run three different workouts, A on Monday, B on Wednesday, C on Friday, and add weight to an exercise once every set reaches the top of its rep range.

These are the same three sessions as LiftLoggr’s Full body starter split. Below: the weekly layout, why A/B/C beats one repeated workout, the progression rule with a worked log, weekly volume, deloads, substitutions and the routine file.

The weekly schedule

Day Session Lower body Push Pull Extra
Mon A Back squat Bench press Barbell row Lateral raise
Wed B Romanian deadlift Overhead press Lat pulldown Leg curl, hammer curl
Fri C Leg press Incline dumbbell press Seated cable row Face pull, pushdown

Any three non-consecutive days work: Tuesday/Thursday/Saturday, or Monday/Wednesday/Saturday. Keep the A → B → C order. If you miss a session, don’t skip it: do it next time and keep rotating.

Why three different sessions? Each lift gets trained once a week, hard, and each muscle still gets 2–3 sessions a week through related exercises. Quads get squats on A and leg presses on C. Chest gets the bench on A and the incline dumbbell press on C. Hamstrings get Romanian deadlifts and leg curls on B. A single repeated workout trains the same three lifts three times a week and either gets very long or leaves gaps.

Session length. 4–5 exercises, 12–15 working sets, 45–55 minutes with warm-ups. Rest 2–3 minutes after the first two exercises and 60–90 seconds after the others.

Sets, reps and effort

Three working sets per exercise. Heavy compounds at 6–10 reps, other compounds at 8–12, small muscles at 10–15 or 12–20. The ACSM position stand recommends 8–12 repetition maximums for novices; this plan lowers the floor to 6 on the squat, bench and overhead press, which tolerate heavier loads, and keeps everything else at 8 or more.

Stop each set with 2 reps in reserve on compounds and 1 on isolation work. You should be able to do one or two more clean reps, but not five. Not sure how that feels? See RIR vs RPE and the RIR chart.

Warm up the first lift of each session with 2–4 ramp sets. The warm-up calculator works them out from your working weight.

Starting weights

Spend the first week finding weights, not testing limits. For each exercise, pick a weight you can lift for the top of the range with 3–4 reps left, do your three sets, and log it. In week 2, the real work starts at the bottom-to-middle of the range with 2 reps left.

Exercise Reasonable first try
Back squat, bench press, overhead press Empty bar: 20 kg (45 lb)
Romanian deadlift Bar plus 5–10 kg (10–20 lb) per side
Barbell row Empty bar or bar plus 5 kg (10 lb) per side
Machines and cables The lightest stack setting that feels like work by rep 10
Dumbbells 5–10 kg (10–20 lb) per hand for presses, less for raises

If the first set flies, go up before the second set. Use the plate calculator to load the bar without arithmetic.

Load and progression

Double progression on every exercise:

  1. Choose a weight you can lift for the bottom of the range with about 2 reps left.
  2. At that weight, add reps session to session.
  3. When all three sets reach the top of the range, add one step: 2.5 kg (5 lb) for barbells and machines, the next dumbbell for dumbbell lifts.
  4. Reps drop back. Climb again.

Each lift appears once a week, so you get one attempt per week to add a rep. For a beginner that still means steady progress; the ACSM stand puts the load jump at 2–10% once you beat the target by one or two reps.

A worked four-week example

Romanian deadlift on session B, 3 × 8–12, starting at 70 kg:

Week Weight Set 1 Set 2 Set 3 Decision
1 70.0 kg 10 9 9 Stay
2 70.0 kg 12 11 10 Stay
3 70.0 kg 12 12 12 All at the top: add 2.5 kg
4 72.5 kg 10 10 9 Stay, climb again

Beginners often reach the top of the range every week at first. If you add weight three weeks in a row and reps never drop below the middle of the range, your starting weights were light. That’s fine; the progression catches up. More in double progression.

Weekly volume per muscle

Muscle Direct sets / week Sessions / week
Quads 6 2 (A, C)
Hamstrings 6 1 (B: RDL and leg curl)
Glutes — 3 (squat, RDL, leg press)
Chest 6 2 (A, C)
Back 9 3 (row, pulldown, cable row)
Shoulders 9 3 (overhead press, lateral raise, face pull)
Biceps 3 3 (direct on B, plus every pull)
Triceps 3 3 (direct on C, plus every press)
Calves 0 —

That lands most muscles at 6–9 direct sets a week, which is a sound starting dose. Schoenfeld, Ogborn and Krieger’s 2017 meta-analysis found that more weekly sets produced more muscle growth, so the obvious next step after a few months is a fourth set on the first two lifts of each session, not more exercises. The plan also clears the CDC’s minimum of muscle-strengthening work on 2 or more days a week covering all major muscle groups. Run your own numbers through the weekly volume calculator, or read sets per muscle per week.

Deload rule

Seven weeks hard, then one deload week: the same three sessions, 2 sets instead of 3, about 10% lighter, 3–4 reps in reserve. Go back to your pre-deload weights the week after.

Deload early if a lift misses the bottom of its rep range three sessions in a row at the same weight, or if you dread sessions you used to look forward to. Beginners often run straight through 8 weeks without needing one; take it anyway if joints or sleep say so. Details in the deload week guide.

Substitutions

Planned Swap for Guide
Barbell back squat Goblet squat, hack squat, Smith machine squat Squat alternatives
Barbell bench press Dumbbell bench press, machine chest press Bench press alternatives
Barbell row Chest-supported dumbbell row, seated machine row Barbell row alternatives
Romanian deadlift Dumbbell RDL, trap bar deadlift Deadlift alternatives
Overhead press Seated dumbbell press, machine shoulder press Overhead press alternatives
Lat pulldown Pull-up, assisted pull-up Pull-up alternatives

All-machine gym or new to barbells? The beginner gym workout plan has a full machine version of a 3-day full-body plan.

Common mistakes

  • Two days in a row. Every session trains the legs. Keep a rest day between sessions.
  • Treating C as optional. It carries a third of the chest, back and quad volume.
  • Adding a fourth and fifth exercise every week. Add a set to what’s there before adding exercises.
  • Racing through rest. 60 seconds between heavy squat sets costs reps, and reps are how this program measures progress.
  • Changing weights by feel. Follow the rule: all sets at the top, then add. Log every set; see how to track workouts.

Full body vs a split

Schoenfeld, Grgic and Krieger’s 2019 meta-analysis found no meaningful difference in muscle growth between training frequencies when weekly volume was equal. Full body earns its place on three days because no split can train each muscle twice in three sessions. With four days, upper/lower does the same job with longer per-muscle work. With six, push pull legs. For strength-first, low-rep alternatives on three days, see 5x5 and GZCLP. The split chooser compares all eight.

Run it in LiftLoggr

Download the routine file below (full-body-3-day.liftloggr.json). On your iPhone, open it from Safari’s downloads or the Files app, tap Share and choose LiftLoggr. Or in the app: Settings → Data → Import workout templates → Open JSON file.

LiftLoggr previews the file and imports nothing until you tap Import. You get three routines, Full body A, B and C, with sets, rep ranges and target RIR. Importing the same file twice doesn’t duplicate them. If you chose the Full body starter split on first launch, you already have these sessions without the RIR targets.

  • First session: the file has no weights, so enter yours.
  • After that: each set pre-fills from last time, with last time’s weight and reps beside it.
  • Progression: when every working set reached the top of the range, the next session pre-fills one step heavier; two steps if every set was logged at RIR 3 or more. On light dumbbells, where one step is more than 10% of the weight, it asks for a few extra reps first.
  • Stalls: three sessions below the bottom of the range at the same weight bring up a deload suggestion of about 10%.

Set a weekday on each routine if you want Home to follow Monday/Wednesday/Friday. Without weekdays, Home suggests the next session in the A → B → C order.

Questions

Is a full body workout 3 days a week enough?

Yes, for most lifters. It trains every major muscle two or three times a week and lands at 6–9 hard sets per muscle. That is enough to build strength and muscle for beginners and early intermediates. Add sets when progress slows, not before.

Can I do the same full-body workout every session?

You can, but rotating A, B and C trains each muscle from more angles and lets you push each lift once a week while still hitting the muscle on other days. It also keeps sessions shorter.

Full body or a split?

On three days, full body. Splits make sense when you train four or more days: upper/lower on four, push pull legs on six. With volume equal, research finds little difference in muscle growth between frequencies.

Can I train two days in a row?

Better not. Each session trains legs and upper body, so back-to-back days hit the same muscles with no recovery. If you must, put session C, the lightest, second.

What about abs and calves?

The plan has no direct abs or calf work, to keep sessions under an hour. Add 2 sets of calf raises and 2 sets of cable crunches to any session if you want them.

Sources

  1. Schoenfeld, Grgic & Krieger 2019, frequency meta-analysis revisited (J Sports Sci) pubmed.ncbi.nlm.nih.gov
  2. Schoenfeld, Ogborn & Krieger 2016, training frequency and hypertrophy (Sports Med) pubmed.ncbi.nlm.nih.gov
  3. Schoenfeld, Ogborn & Krieger 2017, weekly sets and muscle growth (J Sports Sci) pubmed.ncbi.nlm.nih.gov
  4. ACSM 2009 position stand, progression models in resistance training pubmed.ncbi.nlm.nih.gov
  5. CDC, adult physical activity guidelines overview cdc.gov